{"id":3772,"date":"2020-10-28T09:24:15","date_gmt":"2020-10-28T09:24:15","guid":{"rendered":"https:\/\/www.aluminiumceramicfiber.com\/?p=3772"},"modified":"2020-10-28T09:24:15","modified_gmt":"2020-10-28T09:24:15","slug":"shrinkage-defects","status":"publish","type":"post","link":"https:\/\/www.aluminiumceramicfiber.com\/ar\/shrinkage-defects\/","title":{"rendered":"Shrinkage Defects"},"content":{"rendered":"

Through exploration and experimentation, in the gravity casting of aluminum alloy wheels, coating thickness, alloy liquid pouring temperature and mold temperature have a great influence on surface shrinkage defects, and the influence of mold temperature is particularly prominent. In the case of too high or too low mold core temperature, shrinkage defects may occur on the surface of the hub in the wheel, resulting in an uneven surface. The middle hub of the aluminum alloy wheel<\/a> has a relatively thin buffer chamber diaphragm, while the surrounding wall thickness of the middle hub is thicker.<\/p>\n

During the solidification of the aluminum alloy liquid, the buffer chamber diaphragm acts as a feeder channel. The central riser aligns with the middle hub and part of the spokes. Feeding must be done through the partition. When the mold core temperature is too low, the solidification speed of the middle hub diaphragm is relatively fast after the aluminum alloy liquid is poured, and the feeding channel is closed prematurely, which greatly weakens the feeding effect of the center riser, which is easy to be on the surface of the middle hub, especially the middle hub. A shrinkage defect occurs where the hub and the spoke are connected.<\/p>\n

\"Shrinkage<\/p>\n

If the mold core temperature is too high, although the solidification rate of the partition is reduced, it will also cause the hot joints where the hub and the spokes to solidify very slowly. When it lags behind the solidification time of the partition, the center riser will also cause shrinkage on the surface of the hub. Actual production shows that the mold core temperature of this type of wheel is more appropriate at 450~480\u2103, which can make the center riser play a better role in feeding. After measurement, the coating thickness and the casting temperature of the aluminum alloy liquid in the production meet the requirements, but the mold core temperature is high, often above 480\u2103. Therefore, it is necessary to reduce the shrinkage of the surface under the existing production cycle conditions, and it is necessary to strengthen the mold core. Cool down, lower the temperature of the mold core, and accelerate the solidification speed around the middle hub.<\/p>","protected":false},"excerpt":{"rendered":"

Through exploration and experimentation, in the gravity casting of aluminum alloy wheels, coating thickness, alloy liquid pouring temperature and mold temperature have a great influence on surface shrinkage defects, and the influence of mold temperature is particularly prominent. In the case of too high or too low mold core temperature, shrinkage defects may occur on […]<\/p>\n","protected":false},"author":1,"featured_media":3773,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[86],"tags":[],"class_list":["post-3772","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog"],"yoast_head":"\nShrinkage Defects on Aluminum Alloy in Casting Process<\/title>\n<meta name=\"description\" content=\"Aluminum liquid pouring temperature and mold temperature have a great influence on surface shrinkage defects, and temperature is important.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.aluminiumceramicfiber.com\/ar\/shrinkage-defects\/\" \/>\n<meta property=\"og:locale\" content=\"ar_AR\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Shrinkage Defects on Aluminum Alloy in Casting Process\" \/>\n<meta property=\"og:description\" content=\"Aluminum liquid pouring temperature and mold temperature have a great influence on surface shrinkage defects, and temperature is important.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.aluminiumceramicfiber.com\/ar\/shrinkage-defects\/\" \/>\n<meta property=\"og:site_name\" content=\"Tap Out Cone,Refining Flux,Ceramic Foam Filter,Aluminum Cast Materials\" \/>\n<meta property=\"article:published_time\" content=\"2020-10-28T09:24:15+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.aluminiumceramicfiber.com\/wp-content\/uploads\/2020\/10\/Shrinkage-Defects.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"500\" \/>\n\t<meta property=\"og:image:height\" content=\"400\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.aluminiumceramicfiber.com\/ar\/#website\",\"url\":\"https:\/\/www.aluminiumceramicfiber.com\/ar\/\",\"name\":\"Tap Out Cone,Refining Flux,Ceramic Foam Filter,Aluminum Cast Materials\",\"description\":\"One-Stop Shopping\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":\"https:\/\/www.aluminiumceramicfiber.com\/ar\/?s={search_term_string}\",\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"ar\"},{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/www.aluminiumceramicfiber.com\/shrinkage-defects\/#primaryimage\",\"inLanguage\":\"ar\",\"url\":\"https:\/\/www.aluminiumceramicfiber.com\/wp-content\/uploads\/2020\/10\/Shrinkage-Defects.jpg\",\"width\":500,\"height\":400,\"caption\":\"Shrinkage Defects\"},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.aluminiumceramicfiber.com\/shrinkage-defects\/#webpage\",\"url\":\"https:\/\/www.aluminiumceramicfiber.com\/shrinkage-defects\/\",\"name\":\"Shrinkage Defects on Aluminum Alloy in Casting Process\",\"isPartOf\":{\"@id\":\"https:\/\/www.aluminiumceramicfiber.com\/ar\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/www.aluminiumceramicfiber.com\/shrinkage-defects\/#primaryimage\"},\"datePublished\":\"2020-10-28T09:24:15+00:00\",\"dateModified\":\"2020-10-28T09:24:15+00:00\",\"author\":{\"@id\":\"https:\/\/www.aluminiumceramicfiber.com\/ar\/#\/schema\/person\/dca5cd1ef02977f5c9bcd0b96d2d64b6\"},\"description\":\"Aluminum liquid pouring temperature and mold temperature have a great influence on surface shrinkage defects, and temperature is important.\",\"breadcrumb\":{\"@id\":\"https:\/\/www.aluminiumceramicfiber.com\/shrinkage-defects\/#breadcrumb\"},\"inLanguage\":\"ar\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.aluminiumceramicfiber.com\/shrinkage-defects\/\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.aluminiumceramicfiber.com\/shrinkage-defects\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"item\":{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.aluminiumceramicfiber.com\/\",\"url\":\"https:\/\/www.aluminiumceramicfiber.com\/\",\"name\":\"Home\"}},{\"@type\":\"ListItem\",\"position\":2,\"item\":{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.aluminiumceramicfiber.com\/shrinkage-defects\/\",\"url\":\"https:\/\/www.aluminiumceramicfiber.com\/shrinkage-defects\/\",\"name\":\"Shrinkage Defects\"}}]},{\"@type\":\"Person\",\"@id\":\"https:\/\/www.aluminiumceramicfiber.com\/ar\/#\/schema\/person\/dca5cd1ef02977f5c9bcd0b96d2d64b6\",\"name\":\"adtechnew\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/www.aluminiumceramicfiber.com\/ar\/#personlogo\",\"inLanguage\":\"ar\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/260cf9357f35fc676d5fc89811dc976b08eee83dda7e1da206a3c58afae13e29?s=96&d=mm&r=g\",\"caption\":\"adtechnew\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","_links":{"self":[{"href":"https:\/\/www.aluminiumceramicfiber.com\/ar\/wp-json\/wp\/v2\/posts\/3772","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.aluminiumceramicfiber.com\/ar\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.aluminiumceramicfiber.com\/ar\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.aluminiumceramicfiber.com\/ar\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.aluminiumceramicfiber.com\/ar\/wp-json\/wp\/v2\/comments?post=3772"}],"version-history":[{"count":1,"href":"https:\/\/www.aluminiumceramicfiber.com\/ar\/wp-json\/wp\/v2\/posts\/3772\/revisions"}],"predecessor-version":[{"id":3774,"href":"https:\/\/www.aluminiumceramicfiber.com\/ar\/wp-json\/wp\/v2\/posts\/3772\/revisions\/3774"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.aluminiumceramicfiber.com\/ar\/wp-json\/wp\/v2\/media\/3773"}],"wp:attachment":[{"href":"https:\/\/www.aluminiumceramicfiber.com\/ar\/wp-json\/wp\/v2\/media?parent=3772"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.aluminiumceramicfiber.com\/ar\/wp-json\/wp\/v2\/categories?post=3772"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.aluminiumceramicfiber.com\/ar\/wp-json\/wp\/v2\/tags?post=3772"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}