{"id":949,"date":"2020-05-27T10:20:09","date_gmt":"2020-05-27T10:20:09","guid":{"rendered":"https:\/\/aluminiumceramicfiber.com\/?p=949"},"modified":"2020-10-27T06:38:07","modified_gmt":"2020-10-27T06:38:07","slug":"fluxes-for-aluminum-alloys","status":"publish","type":"post","link":"https:\/\/www.aluminiumceramicfiber.com\/ar\/fluxes-for-aluminum-alloys\/","title":{"rendered":"\u0645\u0648\u0627\u062f \u0627\u0644\u0635\u0647\u0631 \u0644\u0633\u0628\u0627\u0626\u0643 \u0627\u0644\u0623\u0644\u0648\u0645\u0646\u064a\u0648\u0645"},"content":{"rendered":"<p>Fluxes for aluminum alloys are generally composed of chlorides and fluorides of alkali metals and alkaline earth metals, and their main components are KCl, NaCl, CaF, Na3 AlF6, Na2 SiF6, etc. The physical and chemical properties of the flux (melting point, density, viscosity, volatility, hygroscopicity, and interface with oxides) play a decisive role in the refining effect.<\/p>\n<p>Chloride salt is the most common basic component in aluminum alloy flux, and the mixed salt of 45% NaCl and 55% KCl is the most widely used. Because they have a strong ability to infiltrate solid Al203, inclusions and oxide film, and the specific gravity of NaCl and KCl at the melting temperature is only 1.55g \/ cm and 1.50g \/ cm, which is significantly smaller than that of aluminum melt. Therefore, Fluxes for Aluminum Alloys can spread well on the surface of aluminum melt, crush and adsorb the oxide film on the surface of the melt. However, the flux containing only chloride salts, the crushing and adsorption process is carried out slowly, you must manually stir to accelerate. Chloride has low surface tension and good wettability, and is suitable as a covering agent.<\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"size-full wp-image-937\" src=\"https:\/\/aluminiumceramicfiber.com\/wp-content\/uploads\/2020\/05\/AdTech-Fluxes.jpg\" alt=\"\u0639\u0627\u0645\u0644 \u062a\u0643\u0631\u064a\u0631 \u0627\u0644\u0623\u0644\u0648\u0645\u0646\u064a\u0648\u0645\" width=\"500\" height=\"400\" srcset=\"https:\/\/www.aluminiumceramicfiber.com\/wp-content\/uploads\/2020\/05\/AdTech-Fluxes.jpg 500w, https:\/\/www.aluminiumceramicfiber.com\/wp-content\/uploads\/2020\/05\/AdTech-Fluxes-300x240.jpg 300w\" sizes=\"auto, (max-width: 500px) 100vw, 500px\" \/><\/p>\n<div id=\"ez-toc-container\" class=\"ez-toc-v2_0_83 counter-hierarchy ez-toc-counter ez-toc-grey ez-toc-container-direction\">\n<div class=\"ez-toc-title-container\">\n<p class=\"ez-toc-title\" style=\"cursor:inherit\">\u062c\u062f\u0648\u0644 \u0627\u0644\u0645\u062d\u062a\u0648\u064a\u0627\u062a<\/p>\n<span class=\"ez-toc-title-toggle\"><a href=\"#\" class=\"ez-toc-pull-right ez-toc-btn ez-toc-btn-xs ez-toc-btn-default ez-toc-toggle\" aria-label=\"Toggle Table of Content\"><span class=\"ez-toc-js-icon-con\"><span class=\"\"><span class=\"eztoc-hide\" style=\"display:none;\">\u062a\u0628\u062f\u064a\u0644<\/span><span class=\"ez-toc-icon-toggle-span\"><svg style=\"fill: #999;color:#999\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" class=\"list-377408\" width=\"20px\" height=\"20px\" viewbox=\"0 0 24 24\" fill=\"none\"><path d=\"M6 6H4v2h2V6zm14 0H8v2h12V6zM4 11h2v2H4v-2zm16 0H8v2h12v-2zM4 16h2v2H4v-2zm16 0H8v2h12v-2z\" fill=\"currentColor\"><\/path><\/svg><svg style=\"fill: #999;color:#999\" class=\"arrow-unsorted-368013\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" width=\"10px\" height=\"10px\" viewbox=\"0 0 24 24\" version=\"1.2\" baseprofile=\"tiny\"><path d=\"M18.2 9.3l-6.2-6.3-6.2 6.3c-.2.2-.3.4-.3.7s.1.5.3.7c.2.2.4.3.7.3h11c.3 0 .5-.1.7-.3.2-.2.3-.5.3-.7s-.1-.5-.3-.7zM5.8 14.7l6.2 6.3 6.2-6.3c.2-.2.3-.5.3-.7s-.1-.5-.3-.7c-.2-.2-.4-.3-.7-.3h-11c-.3 0-.5.1-.7.3-.2.2-.3.5-.3.7s.1.5.3.7z\"\/><\/svg><\/span><\/span><\/span><\/a><\/span><\/div>\n<nav><ul class='ez-toc-list ez-toc-list-level-1' ><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-1\" href=\"https:\/\/www.aluminiumceramicfiber.com\/ar\/fluxes-for-aluminum-alloys\/#Fluxes_for_Aluminum_Alloys\" >\u0645\u0648\u0627\u062f \u0627\u0644\u0635\u0647\u0631 \u0644\u0633\u0628\u0627\u0626\u0643 \u0627\u0644\u0623\u0644\u0648\u0645\u0646\u064a\u0648\u0645<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-2\" href=\"https:\/\/www.aluminiumceramicfiber.com\/ar\/fluxes-for-aluminum-alloys\/#Flux_Refining_for_Aluminum_Alloys\" >Flux Refining for Aluminum Alloys<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-3\" href=\"https:\/\/www.aluminiumceramicfiber.com\/ar\/fluxes-for-aluminum-alloys\/#How_to_Use_Flux\" >\u0643\u064a\u0641\u064a\u0629 \u0627\u0633\u062a\u062e\u062f\u0627\u0645 Flux<\/a><\/li><\/ul><\/nav><\/div>\n<h2><span class=\"ez-toc-section\" id=\"Fluxes_for_Aluminum_Alloys\"><\/span>\u0645\u0648\u0627\u062f \u0627\u0644\u0635\u0647\u0631 \u0644\u0633\u0628\u0627\u0626\u0643 \u0627\u0644\u0623\u0644\u0648\u0645\u0646\u064a\u0648\u0645<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>A small amount of fluoride salts such as NaF, Na3 AlF6, and CaF2 are added to the chloride salt mixture, mainly for refining. Fluoride salt flux can also effectively remove the oxide film on the surface of the melt and improve the degassing effect.<\/p>\n<p>(1) Fluoride can chemically react with aluminum melt to produce gaseous AlF, SiF 4, BF3, etc. They promote the separation of the oxide film from the aluminum melt and squeeze the oxide film.<\/p>\n<p>(2) The current generated at the interface where the above reaction occurs also causes the oxide film to be &#8220;washed&#8221; and broken. Therefore, the presence of the fluorine salt significantly accelerates the destruction process of the oxide film on the surface of the aluminum melt, and the hydrogen in the melt can easily escape.<\/p>\n<p>(3) Fluoride (especially CaF2) can increase the surface tension of the mixed molten salt, spheroidize the molten salt of the adsorbed oxide, facilitate separation from the melt, and reduce the loss caused by the slag entrapped in aluminum.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"Flux_Refining_for_Aluminum_Alloys\"><\/span>Flux Refining for Aluminum Alloys<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>\u0627\u0644\u0640 <a href=\"https:\/\/www.aluminiumceramicfiber.com\/ar\/aluminum-refining-agent\/\">flux refining method<\/a> has a good effect on discharging non-metallic inclusions. In addition to the physical and chemical properties of the flux, the degree of purification is also largely dependent on the refining process conditions. Such as the amount of flux, the contact time and contact area of the flux with the melt, stirring conditions, temperature, etc.<\/p>\n<p>When smelting aluminum alloy waste, the quality of the waste is different, and the amount of covering agent and refining agent is also different. When smelting good quality waste materials, the amount of covering agent and refining agent is relatively small. When smelting the waste with poor quality, the amount of covering agent and refining agent is large. For high-magnesium aluminum alloys, they should be covered with fluxes without sodium salt to avoid contact with sodium-containing fluxes. Sodium-free refining agents are mainly used for high-magnesium alloy flat ingots such as 5052 and 5754.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"How_to_Use_Flux\"><\/span>\u0643\u064a\u0641\u064a\u0629 \u0627\u0633\u062a\u062e\u062f\u0627\u0645 Flux<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>The flux refining method is widely used in smelting aluminum alloy production. The aluminum alloy melt is refined in the furnace, the flux is loaded into the refining tank, the refining tube is used as a carrier by inert gas blowing, and it continuously enters the aluminum liquid, and the flux and the melt are fully mixed. The stirring can achieve the purpose of refining. The greater the intensity of stirring and the more uniform the powder spraying, the better the refining effect. But it should be noted that the fluctuation of the aluminum liquid cannot be too large. Otherwise, it will lead to the formation of a new oxide film.<\/p>","protected":false},"excerpt":{"rendered":"<p>Fluxes for aluminum alloys are generally composed of chlorides and fluorides of alkali metals and alkaline earth metals, and their main components are KCl, NaCl, CaF, Na3 AlF6, Na2 SiF6, etc. The physical and chemical properties of the flux (melting point, density, viscosity, volatility, hygroscopicity, and interface with oxides) play a decisive role in the [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":485,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[85],"tags":[807,806],"class_list":["post-949","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-seo","tag-flux-refining-for-aluminum-alloys","tag-fluxes-for-aluminum-alloys"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v15.0 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>Fluxes for Aluminum Alloys,Flux Refining for Aluminum Alloys<\/title>\n<meta name=\"description\" content=\"Fluxes for aluminum alloys are composed of chlorides and fluorides. The aluminum fluxes play a decisive role in the refining effect.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.aluminiumceramicfiber.com\/ar\/fluxes-for-aluminum-alloys\/\" \/>\n<meta property=\"og:locale\" content=\"ar_AR\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Fluxes for Aluminum Alloys,Flux Refining for Aluminum Alloys\" \/>\n<meta property=\"og:description\" content=\"Fluxes for aluminum alloys are composed of chlorides and fluorides. The aluminum fluxes play a decisive role in the refining effect.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.aluminiumceramicfiber.com\/ar\/fluxes-for-aluminum-alloys\/\" \/>\n<meta property=\"og:site_name\" content=\"Tap Out Cone,Refining Flux,Ceramic Foam Filter,Aluminum Cast Materials\" \/>\n<meta property=\"article:published_time\" content=\"2020-05-27T10:20:09+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2020-10-27T06:38:07+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.aluminiumceramicfiber.com\/wp-content\/uploads\/2020\/04\/Aluminum-Casting-Flux.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"800\" \/>\n\t<meta property=\"og:image:height\" content=\"600\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.aluminiumceramicfiber.com\/ar\/#website\",\"url\":\"https:\/\/www.aluminiumceramicfiber.com\/ar\/\",\"name\":\"Tap Out Cone,Refining Flux,Ceramic Foam Filter,Aluminum Cast Materials\",\"description\":\"One-Stop Shopping\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":\"https:\/\/www.aluminiumceramicfiber.com\/ar\/?s={search_term_string}\",\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"ar\"},{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/www.aluminiumceramicfiber.com\/fluxes-for-aluminum-alloys\/#primaryimage\",\"inLanguage\":\"ar\",\"url\":\"https:\/\/www.aluminiumceramicfiber.com\/wp-content\/uploads\/2020\/04\/Aluminum-Casting-Flux.jpg\",\"width\":800,\"height\":600,\"caption\":\"Fluxes for Aluminum Alloys\"},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.aluminiumceramicfiber.com\/fluxes-for-aluminum-alloys\/#webpage\",\"url\":\"https:\/\/www.aluminiumceramicfiber.com\/fluxes-for-aluminum-alloys\/\",\"name\":\"Fluxes for Aluminum Alloys,Flux Refining for Aluminum Alloys\",\"isPartOf\":{\"@id\":\"https:\/\/www.aluminiumceramicfiber.com\/ar\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/www.aluminiumceramicfiber.com\/fluxes-for-aluminum-alloys\/#primaryimage\"},\"datePublished\":\"2020-05-27T10:20:09+00:00\",\"dateModified\":\"2020-10-27T06:38:07+00:00\",\"author\":{\"@id\":\"https:\/\/www.aluminiumceramicfiber.com\/ar\/#\/schema\/person\/dca5cd1ef02977f5c9bcd0b96d2d64b6\"},\"description\":\"Fluxes for aluminum alloys are composed of chlorides and fluorides. The aluminum fluxes play a decisive role in the refining effect.\",\"breadcrumb\":{\"@id\":\"https:\/\/www.aluminiumceramicfiber.com\/fluxes-for-aluminum-alloys\/#breadcrumb\"},\"inLanguage\":\"ar\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.aluminiumceramicfiber.com\/fluxes-for-aluminum-alloys\/\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.aluminiumceramicfiber.com\/fluxes-for-aluminum-alloys\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"item\":{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.aluminiumceramicfiber.com\/\",\"url\":\"https:\/\/www.aluminiumceramicfiber.com\/\",\"name\":\"Home\"}},{\"@type\":\"ListItem\",\"position\":2,\"item\":{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.aluminiumceramicfiber.com\/fluxes-for-aluminum-alloys\/\",\"url\":\"https:\/\/www.aluminiumceramicfiber.com\/fluxes-for-aluminum-alloys\/\",\"name\":\"Fluxes for Aluminum Alloys\"}}]},{\"@type\":\"Person\",\"@id\":\"https:\/\/www.aluminiumceramicfiber.com\/ar\/#\/schema\/person\/dca5cd1ef02977f5c9bcd0b96d2d64b6\",\"name\":\"adtechnew\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/www.aluminiumceramicfiber.com\/ar\/#personlogo\",\"inLanguage\":\"ar\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/260cf9357f35fc676d5fc89811dc976b08eee83dda7e1da206a3c58afae13e29?s=96&d=mm&r=g\",\"caption\":\"adtechnew\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","_links":{"self":[{"href":"https:\/\/www.aluminiumceramicfiber.com\/ar\/wp-json\/wp\/v2\/posts\/949","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.aluminiumceramicfiber.com\/ar\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.aluminiumceramicfiber.com\/ar\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.aluminiumceramicfiber.com\/ar\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.aluminiumceramicfiber.com\/ar\/wp-json\/wp\/v2\/comments?post=949"}],"version-history":[{"count":5,"href":"https:\/\/www.aluminiumceramicfiber.com\/ar\/wp-json\/wp\/v2\/posts\/949\/revisions"}],"predecessor-version":[{"id":3623,"href":"https:\/\/www.aluminiumceramicfiber.com\/ar\/wp-json\/wp\/v2\/posts\/949\/revisions\/3623"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.aluminiumceramicfiber.com\/ar\/wp-json\/wp\/v2\/media\/485"}],"wp:attachment":[{"href":"https:\/\/www.aluminiumceramicfiber.com\/ar\/wp-json\/wp\/v2\/media?parent=949"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.aluminiumceramicfiber.com\/ar\/wp-json\/wp\/v2\/categories?post=949"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.aluminiumceramicfiber.com\/ar\/wp-json\/wp\/v2\/tags?post=949"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}