{"id":6864,"date":"2021-09-03T06:50:33","date_gmt":"2021-09-03T06:50:33","guid":{"rendered":"https:\/\/www.aluminiumceramicfiber.com\/?p=6864"},"modified":"2021-09-03T06:50:33","modified_gmt":"2021-09-03T06:50:33","slug":"alloys-additives","status":"publish","type":"post","link":"https:\/\/www.aluminiumceramicfiber.com\/id\/alloys-additives\/","title":{"rendered":"Paduan Logam dan Bahan Tambahan"},"content":{"rendered":"

At present, various master alloys are generally used to replace aluminum alloys additives, because master alloys have a low melting point and are easier to quickly and uniformly melt in the aluminum melt. However, many manufacturers use scrap aluminum or low-grade aluminum ingots when producing master alloys, which contain more impurities. When using master alloys, these impurities are brought into the melt and cause pollution.<\/p>\n

\"Paduan<\/p>\n

When smelting alloys, there are generally three ways to add alloying elements: one is to add pure metals directly to the aluminum melt, such as copper, magnesium, zinc, silicon and other metals. The other is to make the alloying elements into a master alloy in advance. Then it is added to the aluminum melt in the form of a master alloy. At present, it is more commonly used to add various metal additives to the aluminum melt. In addition, there is a method of adding, that is, adding salts or compounds containing alloying elements, and reducing the elements through the substitution reaction with the base metal and entering the melt.<\/p>\n

The purpose of using aluminum alloy additives<\/a>\u00a0is to facilitate the addition of some alloying elements that have a higher melting point and are not easily melted or easily oxidized and volatilized, so as to more accurately control the composition of the aluminum alloy. In addition, the use of a master alloy as a charge can prevent the melt from overheating, shorten the smelting time, and reduce metal burnout.<\/p>\n

The aluminum alloys additives used should meet the following basic requirements as much as possible:<\/strong><\/p>\n

(1) The melting point should be lower than or close to the melting temperature of aluminum alloy;
\n(2) The content of alloying elements is as high as possible, and the composition is uniform;
\n(3) Low content of impurities, gases and non-metallic inclusions:
\n(4) It has sufficient brittleness, is easy to break, and is convenient for ingredients;
\n(5) It is not easy to be corroded, and should not be broken into powder when stored under atmospheric temperature and pressure.<\/p>","protected":false},"excerpt":{"rendered":"

At present, various master alloys are generally used to replace aluminum alloys additives, because master alloys have a low melting point and are easier to quickly and uniformly melt in the aluminum melt. However, many manufacturers use scrap aluminum or low-grade aluminum ingots when producing master alloys, which contain more impurities. When using master alloys, […]<\/p>\n","protected":false},"author":1,"featured_media":6865,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[86],"tags":[],"class_list":["post-6864","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog"],"yoast_head":"\nAlloys Additives for Aluminum Melt, Aluminum Alloy<\/title>\n<meta name=\"description\" content=\"The purpose of using aluminum alloys additives\u00a0is to facilitate the addition of some alloying elements that have a higher melting point.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.aluminiumceramicfiber.com\/id\/alloys-additives\/\" \/>\n<meta property=\"og:locale\" content=\"id_ID\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Alloys Additives for Aluminum Melt, Aluminum Alloy\" \/>\n<meta property=\"og:description\" content=\"The purpose of using aluminum alloys additives\u00a0is to facilitate the addition of some alloying elements that have a higher melting point.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.aluminiumceramicfiber.com\/id\/alloys-additives\/\" \/>\n<meta property=\"og:site_name\" content=\"Tap Out Cone,Refining Flux,Ceramic Foam Filter,Aluminum Cast Materials\" \/>\n<meta property=\"article:published_time\" content=\"2021-09-03T06:50:33+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.aluminiumceramicfiber.com\/wp-content\/uploads\/2021\/09\/Alloys-Additives.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"500\" \/>\n\t<meta property=\"og:image:height\" content=\"400\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"adtechnew\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Ditulis oleh\" \/>\n\t<meta name=\"twitter:data1\" content=\"adtechnew\" \/>\n\t<meta name=\"twitter:label2\" content=\"Estimasi waktu membaca\" \/>\n\t<meta name=\"twitter:data2\" content=\"2 menit\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.aluminiumceramicfiber.com\\\/ar\\\/alloys-additives\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.aluminiumceramicfiber.com\\\/ar\\\/alloys-additives\\\/\"},\"author\":{\"name\":\"adtechnew\",\"@id\":\"https:\\\/\\\/www.aluminiumceramicfiber.com\\\/#\\\/schema\\\/person\\\/dca5cd1ef02977f5c9bcd0b96d2d64b6\"},\"headline\":\"Alloys Additives\",\"datePublished\":\"2021-09-03T06:50:33+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.aluminiumceramicfiber.com\\\/ar\\\/alloys-additives\\\/\"},\"wordCount\":334,\"commentCount\":0,\"image\":{\"@id\":\"https:\\\/\\\/www.aluminiumceramicfiber.com\\\/ar\\\/alloys-additives\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.aluminiumceramicfiber.com\\\/wp-content\\\/uploads\\\/2021\\\/09\\\/Alloys-Additives.jpg\",\"articleSection\":[\"Blog\"],\"inLanguage\":\"id\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/www.aluminiumceramicfiber.com\\\/ar\\\/alloys-additives\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.aluminiumceramicfiber.com\\\/ar\\\/alloys-additives\\\/\",\"url\":\"https:\\\/\\\/www.aluminiumceramicfiber.com\\\/ar\\\/alloys-additives\\\/\",\"name\":\"Alloys Additives for Aluminum Melt, Aluminum Alloy\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.aluminiumceramicfiber.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.aluminiumceramicfiber.com\\\/ar\\\/alloys-additives\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.aluminiumceramicfiber.com\\\/ar\\\/alloys-additives\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.aluminiumceramicfiber.com\\\/wp-content\\\/uploads\\\/2021\\\/09\\\/Alloys-Additives.jpg\",\"datePublished\":\"2021-09-03T06:50:33+00:00\",\"author\":{\"@id\":\"https:\\\/\\\/www.aluminiumceramicfiber.com\\\/#\\\/schema\\\/person\\\/dca5cd1ef02977f5c9bcd0b96d2d64b6\"},\"description\":\"The purpose of using aluminum alloys additives\u00a0is to facilitate the addition of some alloying elements that have a higher melting point.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.aluminiumceramicfiber.com\\\/ar\\\/alloys-additives\\\/#breadcrumb\"},\"inLanguage\":\"id\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.aluminiumceramicfiber.com\\\/ar\\\/alloys-additives\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"id\",\"@id\":\"https:\\\/\\\/www.aluminiumceramicfiber.com\\\/ar\\\/alloys-additives\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.aluminiumceramicfiber.com\\\/wp-content\\\/uploads\\\/2021\\\/09\\\/Alloys-Additives.jpg\",\"contentUrl\":\"https:\\\/\\\/www.aluminiumceramicfiber.com\\\/wp-content\\\/uploads\\\/2021\\\/09\\\/Alloys-Additives.jpg\",\"width\":500,\"height\":400,\"caption\":\"Alloys Additives\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.aluminiumceramicfiber.com\\\/ar\\\/alloys-additives\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.aluminiumceramicfiber.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Alloys Additives\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.aluminiumceramicfiber.com\\\/#website\",\"url\":\"https:\\\/\\\/www.aluminiumceramicfiber.com\\\/\",\"name\":\"Tap Out Cone,Refining Flux,Ceramic Foam Filter,Aluminum Cast Materials\",\"description\":\"One-Stop Shopping\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.aluminiumceramicfiber.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"id\"},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.aluminiumceramicfiber.com\\\/#\\\/schema\\\/person\\\/dca5cd1ef02977f5c9bcd0b96d2d64b6\",\"name\":\"adtechnew\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"id\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/260cf9357f35fc676d5fc89811dc976b08eee83dda7e1da206a3c58afae13e29?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/260cf9357f35fc676d5fc89811dc976b08eee83dda7e1da206a3c58afae13e29?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/260cf9357f35fc676d5fc89811dc976b08eee83dda7e1da206a3c58afae13e29?s=96&d=mm&r=g\",\"caption\":\"adtechnew\"},\"sameAs\":[\"https:\\\/\\\/aluminiumceramicfiber.com\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Alloys Additives for Aluminum Melt, Aluminum Alloy","description":"The purpose of using aluminum alloys additives\u00a0is to facilitate the addition of some alloying elements that have a higher melting point.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.aluminiumceramicfiber.com\/id\/alloys-additives\/","og_locale":"id_ID","og_type":"article","og_title":"Alloys Additives for Aluminum Melt, Aluminum Alloy","og_description":"The purpose of using aluminum alloys additives\u00a0is to facilitate the addition of some alloying elements that have a higher melting point.","og_url":"https:\/\/www.aluminiumceramicfiber.com\/id\/alloys-additives\/","og_site_name":"Tap Out Cone,Refining Flux,Ceramic Foam Filter,Aluminum Cast Materials","article_published_time":"2021-09-03T06:50:33+00:00","og_image":[{"width":500,"height":400,"url":"https:\/\/www.aluminiumceramicfiber.com\/wp-content\/uploads\/2021\/09\/Alloys-Additives.jpg","type":"image\/jpeg"}],"author":"adtechnew","twitter_card":"summary_large_image","twitter_misc":{"Ditulis oleh":"adtechnew","Estimasi waktu membaca":"2 menit"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.aluminiumceramicfiber.com\/ar\/alloys-additives\/#article","isPartOf":{"@id":"https:\/\/www.aluminiumceramicfiber.com\/ar\/alloys-additives\/"},"author":{"name":"adtechnew","@id":"https:\/\/www.aluminiumceramicfiber.com\/#\/schema\/person\/dca5cd1ef02977f5c9bcd0b96d2d64b6"},"headline":"Alloys Additives","datePublished":"2021-09-03T06:50:33+00:00","mainEntityOfPage":{"@id":"https:\/\/www.aluminiumceramicfiber.com\/ar\/alloys-additives\/"},"wordCount":334,"commentCount":0,"image":{"@id":"https:\/\/www.aluminiumceramicfiber.com\/ar\/alloys-additives\/#primaryimage"},"thumbnailUrl":"https:\/\/www.aluminiumceramicfiber.com\/wp-content\/uploads\/2021\/09\/Alloys-Additives.jpg","articleSection":["Blog"],"inLanguage":"id","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.aluminiumceramicfiber.com\/ar\/alloys-additives\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.aluminiumceramicfiber.com\/ar\/alloys-additives\/","url":"https:\/\/www.aluminiumceramicfiber.com\/ar\/alloys-additives\/","name":"Alloys Additives for Aluminum Melt, Aluminum Alloy","isPartOf":{"@id":"https:\/\/www.aluminiumceramicfiber.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.aluminiumceramicfiber.com\/ar\/alloys-additives\/#primaryimage"},"image":{"@id":"https:\/\/www.aluminiumceramicfiber.com\/ar\/alloys-additives\/#primaryimage"},"thumbnailUrl":"https:\/\/www.aluminiumceramicfiber.com\/wp-content\/uploads\/2021\/09\/Alloys-Additives.jpg","datePublished":"2021-09-03T06:50:33+00:00","author":{"@id":"https:\/\/www.aluminiumceramicfiber.com\/#\/schema\/person\/dca5cd1ef02977f5c9bcd0b96d2d64b6"},"description":"The purpose of using aluminum alloys additives\u00a0is to facilitate the addition of some alloying elements that have a higher melting point.","breadcrumb":{"@id":"https:\/\/www.aluminiumceramicfiber.com\/ar\/alloys-additives\/#breadcrumb"},"inLanguage":"id","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.aluminiumceramicfiber.com\/ar\/alloys-additives\/"]}]},{"@type":"ImageObject","inLanguage":"id","@id":"https:\/\/www.aluminiumceramicfiber.com\/ar\/alloys-additives\/#primaryimage","url":"https:\/\/www.aluminiumceramicfiber.com\/wp-content\/uploads\/2021\/09\/Alloys-Additives.jpg","contentUrl":"https:\/\/www.aluminiumceramicfiber.com\/wp-content\/uploads\/2021\/09\/Alloys-Additives.jpg","width":500,"height":400,"caption":"Alloys Additives"},{"@type":"BreadcrumbList","@id":"https:\/\/www.aluminiumceramicfiber.com\/ar\/alloys-additives\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.aluminiumceramicfiber.com\/"},{"@type":"ListItem","position":2,"name":"Alloys Additives"}]},{"@type":"WebSite","@id":"https:\/\/www.aluminiumceramicfiber.com\/#website","url":"https:\/\/www.aluminiumceramicfiber.com\/","name":"Kerucut Tap Out, Fluks Pemurnian, Filter Busa Keramik, Bahan Cor Aluminium","description":"Belanja Serba Ada","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.aluminiumceramicfiber.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"id"},{"@type":"Person","@id":"https:\/\/www.aluminiumceramicfiber.com\/#\/schema\/person\/dca5cd1ef02977f5c9bcd0b96d2d64b6","name":"adtechbaru","image":{"@type":"ImageObject","inLanguage":"id","@id":"https:\/\/secure.gravatar.com\/avatar\/260cf9357f35fc676d5fc89811dc976b08eee83dda7e1da206a3c58afae13e29?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/260cf9357f35fc676d5fc89811dc976b08eee83dda7e1da206a3c58afae13e29?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/260cf9357f35fc676d5fc89811dc976b08eee83dda7e1da206a3c58afae13e29?s=96&d=mm&r=g","caption":"adtechnew"},"sameAs":["https:\/\/aluminiumceramicfiber.com"]}]}},"_links":{"self":[{"href":"https:\/\/www.aluminiumceramicfiber.com\/id\/wp-json\/wp\/v2\/posts\/6864","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.aluminiumceramicfiber.com\/id\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.aluminiumceramicfiber.com\/id\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.aluminiumceramicfiber.com\/id\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.aluminiumceramicfiber.com\/id\/wp-json\/wp\/v2\/comments?post=6864"}],"version-history":[{"count":1,"href":"https:\/\/www.aluminiumceramicfiber.com\/id\/wp-json\/wp\/v2\/posts\/6864\/revisions"}],"predecessor-version":[{"id":6866,"href":"https:\/\/www.aluminiumceramicfiber.com\/id\/wp-json\/wp\/v2\/posts\/6864\/revisions\/6866"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.aluminiumceramicfiber.com\/id\/wp-json\/wp\/v2\/media\/6865"}],"wp:attachment":[{"href":"https:\/\/www.aluminiumceramicfiber.com\/id\/wp-json\/wp\/v2\/media?parent=6864"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.aluminiumceramicfiber.com\/id\/wp-json\/wp\/v2\/categories?post=6864"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.aluminiumceramicfiber.com\/id\/wp-json\/wp\/v2\/tags?post=6864"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}