Tag Archives: Molten Aluminum Ceramic Foam Filter

Alcan foundry ceramic foam filters not only have a good purification effect, but also is convenient to use. The melt only needs a pressure difference of 100~150 mm when it passes through, and once it passes, it only needs to maintain a pressure difference of 2-10 mm. Its purification principle is the same as that […]

Commercial aluminum-lithium (Al-Li) alloys are mainly used in aerospace applications due to their low density, high specific modulus, excellent low-temperature toughness, and excellent fatigue crack growth resistance. Every time 1% by weight of lithium is added, the density of the AL-Li alloy can be reduced by about 3%, and its stiffness can be increased by […]

The purification of metal liquid plays an important role in improving the mechanical properties of castings. At present, the filtering device used to purify the metal liquid is mainly ceramic foam filters for aluminium casting, which can effectively intercept harmful impurities in the metal liquid and convert the metal liquid from turbulent flow to laminar […]

The inclusions are removed in the final processing step before solidifying the molten aluminum into an ingot or billet by filtration. The industry has been completed in the industry for many years by using a variety of technologies, including bed filtration and ceramic foam filter molten aluminum filtration. The production of aluminum ingots and billets […]

A lot of practice shows that the use of foam ceramic filter material can remove inclusions, improve the structure of castings, improve the mechanical properties and pass rate of castings, improve the processing performance of castings and reduce machining costs. Foam ceramics have a good filtering effect and no pollution to the alloy. However, if […]

The liquid metal filter was developed in the 1970s. The liquid metal purification technology was first applied to aluminum alloys. Because the melting point of aluminum alloys is low, the density of alloys and oxides are close, and inclusions are difficult to float. Inclusions are the most common casting defect. In casting production, many process […]

Aluminum liquid filtration generally uses foam ceramic filter filtration. When the aluminum liquid passes through the tortuous and interconnected pores in the foam ceramic, the internal debris is deposited on the wall of the pore under the action of fluid power, inertia, interception, collision, and adsorption. So that the clean aluminum liquid enters the casting […]

Function of Molten Aluminum Ceramic Foam Filter: Removal of impurities Purify the aluminum alloy liquid, the viscosity of the aluminum alloy liquid decreases after filtration, and the fluidity of the aluminum alloy liquid increases by 10%-15%. Therefore, filtration improves the filling capacity of aluminum alloy liquid. The flow of the aluminum alloy liquid before filtration […]