تحسين محركات البحث (SEO)

AdTech offers aluminum liquid filters for filtering molten metal, aluminum liquid filters, a honeycomb ceramic, or a honeycomb structure, the cells extending from one side to the other, usually used to filter molten metal before or during casting. Due to the dimensional change of the molten metal filter in a particular nominal size, and in […]

Carried out an extensive programme on Aluminium Foundry Ceramic Foam Filters performance. In one section of this work, the impact of adding a grain refiner based on the Al-Ti-B system was assessed. They concluded that in case the incoming metal cleanliness was good then there was a minimal impact of the grain refiner on the […]

The usage of Ceramic Foam Filters (CFFs) for aluminum alloy grew continuously in the metal casting process, for the reason that the value-added is greater than the cost of filter application and cost for purchasing a filter. Whereas 20 years ago filters were used only in emergency cases but at present filters can be considered […]

Ceramic foam filter for casting industry can remove metal slag and solution of metal impurities are far stronger than several of the other filter media, filter them with a combination of physics and chemistry. Large inclusions in the filter surface are the physical screen, interception, and tiny inclusions in the role of chemical affinity and […]

Ceramic Foam Filter (CFF) from AdTech is mainly used for aluminum alloy casting. AdTech Metallurgical Materials Co., Ltd has been focusing on research, development, production and marketing of the adhesive ceramic foam filter(CFF) for aluminum alloy casting Since 2012. Ceramic Foam Filters from AdTech are mainly applied for filtration of aluminum and aluminum alloys in […]

The three-dimensional structure of the foundry ceramic foam filter can improve the casting quality on a large scale by changing the molten metal from turbulence flow to lamellar flow, removing the gas, and smoothing the casting. Ceramic foam filter is not only applied for molten metal filtering in high temperature, but gas treatment in high […]

Adtech Refining Flux is fine white ( gray) powder or granular shaped, the main components are chloride and villiaumite, and another chemical compound. Been heat and screen treatment, this product has even granularity, which is convenient for boiling kiln. Widely applied for the refining of casting Aluminum / Alloy in reverberatory furnace and holding furnace. […]

Alumina ceramic foam filters for casting can be made by specific procedures and have peculiar bone-frame holes just like the shape of foam (three-dimensional connected channel) and myriad eyelets which only been found in the big-time microscope. A process for preparing a ceramic foam filter for filtering molten metal which comprises: providing a reticulated, organic […]

Ceramic foam filter is a new type of industrial ceramic product with low bulk density (0.25~0.65) g/cm3, high porosity (60%~90%), and three-dimensional network structure. Because ceramic foam filter has excellent properties, such as high-temperature resistance, strong chemical resistance, and large surface area due to high porosity, it is widely used in molten metal filtration to […]

The caster nozzle and tip design can be made of any refractory board material such as ceramic fiber. However, the preferred material used to make the nozzle head is suitable for contact with molten metal, and the material is resistant to the dissolution or erosion of molten metal. Caster tip is used for crystal forming […]