مدونة

Launder for metal transfer is suitable for aluminum melting furnace, purifying furnace, casting table, the transportation of molten aluminium between furnace degassing and filtration. Our refractory technology allows manufacturers to eliminate the flow slots in aluminum furnaces, avoid the need to “superheat” the metal in in-line equipment, and most importantly, lower the holding furnace temperature. […]

Aluminium Degassing Device is based on the movement of dissolved hydrogen from a high concentration region (in the melt) to a low concentration region (in the inert gas). Hydrogen is dispersed in the molten metal, just as it would be released in any confined space. It will maintain a constant concentration throughout the melt. Hydrogen […]

Molten Metal Filtration Australia is a new type of industrial ceramic product with low bulk density (0.25-0.65) g/cm3, high porosity (60-90%), and three-dimensional network framework. Ceramic foam filter has the characteristics of high temperature resistance, chemical corrosion resistance, interpenetration, large specific surface area and so on. Ceramic foam filter is widely used in metal melt […]

Foam ceramic filter Canada with polyurethane foam as the carrier, filled by refractory aggregate sintering additives, adhesives and other fine powder and water made of ceramic slurry, and then the slurry is extruded ceramic material around foam fibers. Polyurethane after drying, burning, high temperature sintering, heat decomposition, leaving foam ceramic products, namely foam ceramic filter. […]

Danish ceramic foam filter is currently the most effective tool for removing oxidized inclusions from aluminum melt. Melt purification technology of aluminum alloy is the most effective method to improve the quality of casting rod, and it is also the common goal of aluminum industry casting. Use and Selection of Danish Ceramic Foam Filter The […]

Regenerated Aluminum Alloy Process Aluminum waste is melted for 300 minutes at 650℃. To remove slag from molten aluminum alloy. Adjust the composition of molten aluminum alloy to that of 2024 aluminum alloy. Then the target aluminum alloy molten solution was degassed and modified at 700℃ for 60 minutes for refining. Degassing is performed by […]

Ceramic Filter Spain Aluminum is made of non-stick aluminum material, and the product is white. It is suitable for the purification process of producing aluminum and aluminum alloys with high quality requirements. It can filter non-metallic slag and micron slag to make the surface of castings smoother. Through physical adsorption and chemical action, Ceramic Foam […]

Foam Ceramic Filter Rusal Group produces high quality casting products for aluminium foundries to reduce waste due to impurities, reduce costs due to impurities, achieve faster extrusion or hot rolling speed, improve productivity and simplify alloy replacement. Foam Ceramic Filter Rusal Group improves the effect of microstructure and increases production. As long as it is […]

Foundry Feed Nozzle is located in front of the rolls of rolling equipment in the aluminum alloy field and is used to guide aluminum alloys. The molten aluminum enters the pouring nozzle from the rear inlet, and then is discharged from the front outlet, enters the roll, where it is cooled by the roll and […]

Foam Ceramic Filter Aluminum Indonesia can improve the damage of Aluminum alloy metallurgical defects on Aluminum deformation production and mechanical properties of final products. Therefore, the purification of aluminum melt is an important process in the pouring process of aluminum bar and aluminum ingot. Before using Foam Ceramic Filter Aluminum Indonesia, the gas and slag […]