تحسين محركات البحث (SEO)

The Alu Asian Foundry filter aluminum used in Norway has the following main characteristics: high mechanical strength, high temperature resistance, no slag, high temperature impact resistance and prevention of side leakage of molten aluminum. Advantages of Alu Asian foundry Filter: 1. Adopting the principle of adsorption, it can effectively remove large inclusions in molten aluminum […]

Alu ceramic foam filters combine the pretreatment and re-casting of waste aluminum, and changes the process flow, and avoids air pollution to the greatest extent, greatly improving the recovery rate of net metal. The CFF  filtering device has Alu ceramic foam filters for casting, which allows gas particles to pass through. In the liquefied layer, […]

We sell ceramic foam filter to all aluminum melting and casting processing industries, such as strip processing plants, foil processing plants, tubular bar processing plants and recycled aluminum ingot plants. The quality of aluminum melt is very important, and has a great influence on its subsequent processing performance and the quality of the final product. […]

Refractory coatings are essential to improve the quality of castings. Compared with sand casting, metal casting has better metallurgical properties and surface properties of castings, small dimensional tolerances, high productivity, and good production economy. Therefore, it has been widely used in aluminum alloy casting production. However, due to the rapid heat transfer rate of the […]

The distribution groove can limit the arbitrary rolling of the molten aluminum and ensure that the aluminum liquid level is slowly and evenly filled into the mold, thereby ensuring the quality of the product. In the casting process of aluminum alloy, the molten aluminum in the melting furnace needs to be injected into the mold […]

The molten metal launder gate has always been an important product used in the aluminum industry. Metal transfer gates are also called molten aluminum baffles, refractory dams, chute dams, chute dams, chute dams, interceptors, and chute gates. In order to make the gate more convenient to use, AdTech has carried out a series of optimizations […]

Refined agent contains adsorptive and melting compounds, which can strongly adsorb and fuse oxides and aluminum dross. These foreign substances are adsorbed on the bubbles and brought to the surface of the molten aluminum as the bubbles rise. In this way, molten aluminum will become pure by degassing and removing slag. Dubai Aluminum uses a […]

The launder system is a heat preservation channel that guides the melt in the furnace to the front box. The launder should be designed to be as short as possible, and at the same time it is best to be airtight. One can avoid excessive melt temperature drop, and the other can avoid secondary pollution […]

Using Al-Ti-B or Al-Ti-C for refining treatment, adding 0.2%, the grain size can be refined from about 80um to 20um. Modification of Al-Si alloys began in 1920, but the disappearance of Na is faster, and the loss of metal is greater; it is difficult to degas without deterioration. These shortcomings limit the use of Na. […]

The nozzle blades of the degassing equipment play an important role in the efficiency of hydrogen removal. It can collide and break the bubbles to make the bubble size smaller, and at the same time use centrifugal force to scatter the bubbles and disperse them evenly, reducing the probability of bubbles merging and improving the […]