نصيحة بشأن العجلات

The caster tip nozzle has a great influence on the quality of the cast-rolled strip, especially the uniformity of the velocity distribution and temperature distribution of the molten aluminum. The aluminum slab in the casting process may have the following: defects such as the excessive thickness of defects, unqualified plate shape, hot zone, holes, cracks, […]

The twin-roll caster tip directly feeds the aluminum melt into the double-strip continuous caster, it is the main component of the high-throughput aluminum continuous casting and rolling process, which will affect the production efficiency of the process. Through the study of the blocking mechanism of the twin-roll caster tip, the structure in the blocked nozzle […]

The Aluminum Casting Tip and Nozzle is the “throat part” of the continuous casting and rolling mill that the aluminum melt is sent to, and its role is very important. Once the Aluminum Casting Tip and Nozzle clogging problems occur, the casting and rolling machine can only be shut down for replacement, resulting in production […]

The life of the ceramic fiber caster tip (casting tip and nozzle, feed nozzle) has a great impact on the production of cast-rolled plates. It is necessary to conduct systematic analysis and research on it to find out effective measures to improve the life of the feed nozzle. The main factors affecting the life of […]

Choosing the right casting tip and nozzle material is important for aluminum sheet casting and rolling production. AdTech Casting Tip and Nozzle are used for the crystal forming and size control of aluminum sheet, strip, and foil blanks in the casting and rolling production line. It is formed by vacuum suction and filtration of nano-fiber […]

The casting tips and temperature of vacuum formed headbox are the key factors to ensure the aluminum coil casting and rolling production. After lowering the vacuum-formed headbox (also called front box, tundish) temperature, the coarse grain defects caused by the excessive temperature can be reduced, the oxidation slagging reaction of the melt at high temperature […]

In the double-roll aluminum casting and rolling process, the distribution caster tips and nozzle have a great influence on the quality of the caster rolling strip. There are defects, such as plate shape, hot zone, holes, surface cracks and subcutaneous wrinkles, etc., because the aluminum melt flow is not uniform in the width direction of […]

The function of the molten aluminum feeding nozzle is to feed the molten aluminum between the casting rolls. Therefore, the feeding nozzle is the key part to directly distribute and transport aluminum melt to roll gap in continuous casting and rolling process, and it is also the throat of the casting system. Whether its structure […]

Foundry Feed Tip is located in front of the rolls of rolling equipment in the aluminum alloy field and is used to guide aluminum alloys. The molten aluminum enters the pouring nozzle from the rear inlet, and then is discharged from the front outlet, enters the roll, where it is cooled by the roll and […]

Foundry Tip Cavity is used for the aluminum strip casting process. Molten aluminum is fed from the elongated casting tip into the nip between two counter-rotating water-cooled rolls. The molten aluminum is cooled when it comes into contact with the rolls and cools as it passes between the rolls, thereby forming a wide cast metal […]