نصيحة بشأن العجلات

Before molten metal is poured into the casting nozzle, it is preferred to heat the nozzle to minimize warpage and to avoid prematurely cooling the molten metal. However, with refractory materials, it is difficult to heat the nozzle uniformly. To minimize sagging experienced with nozzles, use of spacers. A nozzle having a lower plate and […]

A caster tip for twin-roll continuous strip caster that is used for casting non-ferrous metals aluminum. AdTech spacers and strips are used to assemble caster tips for dimensions, crystallization, molten aluminum flow, and temperature control during foil casting. In a typical twin roll caster, liquid aluminum is fed from an elongate casting tip into the […]

The casting nozzle gasket is a key component of the aluminum strip continuous casting machine. It directly affects the quality of the strip and the yield rate of the production. Alumina ceramic gasket is made of high purity fiber material, it is the casting parts of the ceramic fiber caster tip. Compared with the ceramic […]

Typically the feed tip nozzle is made from felt of refractory fibers (alumina and silica), the felt is made by dispersing said fibers in an aqueous solution containing a dispersion of colloidal silica such that the resultant slurry maintains 5% by weight of said fibers. A felt blanket is formed by immersing a felting screen […]

The molten metal enters the gap between a pair of water-cooled continuous caster rolls through a pair of feeding nozzle member funnels. The axes of the rollers of the continuous caster are parallel, and the casters are driven by the continuous rollers in the metal moving direction. The molten metal comes out of the downstream […]

An important part of the molten metal casting process is the feeding nozzle, which delivers the molten metal directly into the gap between the two continuous caster rolls. This process usually makes the top and bottom surfaces of the feed nozzle directly contact the continuous casting roll. Generally, the feed nozzle is made of a […]

For purposes of supplying molten aluminum, to continuous caster, for example, rolling caster, casting nozzles are used having a tip that extends into the casting rolls. Molten aluminum casting nozzles have been fabricated from various refractory materials, such as silica, asbestos, sodium silicate, and lime. The refractory nozzle exhibits good thermal insulation and low heat […]

AdTech ceramic fiber caster nozzle and tip is used for crystallization forming and size control of aluminum plate in the casting production line. It adopts nano-scale fiber composite material, and the process by high-precision equipment. AdTech casting tips and nozzle has moderate density, good thermal insulation, precise size, high oxidation resistance, and low deformation. Nozzle […]

Molten metal is typically introduced into the caster from a trough to a furnace. Typically, a nozzle introduces the molten metal into the mold of the caster. In a twin belt caster, the mold is formed by a pair of opposed movable belts and a pair of opposed side dams. A metal product, such as […]

Feed tip for supplying molten metal such as aluminum to the continuous casting machine, the molten metal is supplied to the cavity and communicated with a nozzle, and the molten metal is communicated and discharged from the nozzle to between the movable members. The baffle is located in the cavity between the molten metal inlet […]