تحسين محركات البحث (SEO)

Molten aluminum launder is used for the distribution and transmission of molten aluminum with high requirements for thermal insulation, such as active water tank during casting and rolling, and distribution tank on cast plate at the same level. Main features of molten aluminum launder 1. Prefabricated runner module, low thermal conductivity and high mechanical strength […]

After aluminum and aluminum alloys are melted, especially after refining, there is a thin layer of scum on the surface of molten aluminum. There is more metallic aluminum in these slags. The function of slagging agent is to change the wettability of slag and molten aluminum. Increase the surface tension at the interface with aluminum, […]

The AdTech flux for aluminum casting is usually added to the furnace, crucible, ladle during the melting, heat preservation or degassing of aluminum. The raw material quality of the flux, the adding method and the product form all affect the efficiency. The flux formulation will vary based on its use and other process variables (such […]

AdTech ceramic foam filters are specially used to filter impurities in molten aluminum. It can effectively remove large inclusions in molten aluminum and adsorb micron-sized particles of inclusions, which can improve surface quality, product performance, and microstructure, thereby increasing the yield. Ceramic foam filter is widely used in the production fields of aluminum profile, aluminum […]

The quality of the alumina ceramic foam filter plate is very important in smelting aluminum melt, and it greatly affects the subsequent processing performance and the quality of the final product. Therefore, all countries in the world attach great importance to the purification of aluminum melt. There are many reasons for aluminum pollution. On the […]

At present, aluminum alloy fluxes are mainly divided into two systems: NaCl-KCl system and KCl-MgCl2 system. The former contains Na and equimolar NaCl-KCl forms a low melting point eutectic at 665°C, which has a strong wetting effect on Al2O3. Generally used in alloys that are not sensitive to Na elements, it is the basis of […]

With the continuous enhancement of environmental protection requirements and environmental awareness, incorporating the impact of flux on the environment into the flux quality evaluation conforms to the development route of green manufacturing. Whether the aluminum foundry flux has odor and smoke during use, whether the emissions will adversely affect the environment, endanger the health of […]

With the continuous improvement of requirements for the purification treatment of aluminum and aluminum alloy melts, the defects of flux chemical purification have become increasingly prominent, which can no longer meet the needs of high-performance aluminum and aluminum alloys and environmental protection requirements. An effective way to solve this problem is to realize the physical […]

The ceramic filter plate is a kind of organic foam impregnated ceramic filter plate slurry. The organic foam is dried through the porous ceramic filter plate. Its uniqueness is that the speciality of the 3D grid structure is opened with the organic foam, and the prepared slurry is uniformly coated on the organic foam body. […]

In casting production, casting waste caused by casting defects such as non-metallic inclusions generally accounts for 50% to 60% of the total number of waste products. The use of molten metal filter technology can effectively reduce or eliminate various non-metallic inclusions and purify liquid casting alloys. The ceramic foam filter uses polyurethane foam as a […]