Tips untuk Roda

The ceramic casting tips are directly connected to the roll gap to fill the aluminum melt between the casting roll gaps steadily and evenly. It not only ensures the balance distribution of the aluminum liquid, but also the balance distribution of the temperature of the aluminum liquid, and does not cause pollution to the melt. […]

The function of the casting feed nozzle is to send the aluminum melt into the gap between the casting rolls. Therefore, the feed nozzle is a key component that directly distributes and transports the aluminum melt to the roll gap in the continuous casting and rolling process, and it is also the throat of the […]

The feeding tip and nozzle provide the casting and rolling zone with a uniform, stable and continuous molten aluminum in the width direction of the plate, which is a prerequisite for the smooth progress of rapid continuous casting and rolling. Before the 1970s, the casting-rolling speed of the casting-rolling mill was low, the quality of […]

The ceramic caster tips, as the “throat component” that feeds the aluminum melt into the high-throughput continuous casting and rolling mill, play a very important role. Once problems such as clogging of the casting nozzle occur, the machine can only be shut down for replacement, resulting in production interruption, waste of manpower and material resources, […]

In the aluminum strip double-roll casting and rolling production process, the casting tip is the most critical component for conveying aluminum melt. Its structure directly affects whether the molten aluminum can flow into the cast-rolling zone uniformly and steadily, which in turn affects the quality of cast-rolled slabs and even the stable and normal production […]

AdTech continuous aluminum sheet casting tips are made by mixing ceramic fiber and many other materials. It has good elasticity, no deformation, long use time. Its special process can effectively prevent molten aluminum from eroding the casting nozzle and avoid carbonization. The structure is a fine and uniform layered fiber structure to prevent the existence […]

The installation and adjustment of continuous casting tips and nozzle are very important for aluminum sheet casting and rolling process. It is related to the surface quality of the cast-rolled strip. Cast-rolling nozzle is a key component of cast-rolling production. Cast-rolling feeding nozzle can improve the partial flow in the feeding nozzle, keeping the speed […]

The caster nozzle for aluminum provides the casting and rolling zone with a uniform, stable and continuous molten aluminum in the width direction of the plate, which is a prerequisite for the smooth progress of rapid ultra-thin continuous casting and rolling. The existing casting and rolling machines have different casting nozzle structures, and the flow […]

The aluminum melt caster tips for aluminum alloy casting and rolling include a flat box-shaped nozzle body formed by a top plate, a bottom plate, a baffle bar, and two side plates. There are two ears with a right triangle in cross-section in the casting nozzle body. The two ears are respectively arranged at the […]

The feed tip of sheet caster is a key component that directly distributes and transports the molten aluminum to the roll gap during the casting and rolling process. The rationality and practicability of its structure and the selection of casting nozzle materials are very important for normal production, stabilizing various process parameters, and improving the […]