Alüminyum Eritme Rafinaj Akısı, alüminyum ve alaşımlarının eritilmesi sırasında gaz ve safsızlıkların giderilmesinde daha etkili bir rol oynar; bu da eriyikteki hidrojen içeriğinin azalmasına ve metallerin yanma kaybının daha etkili bir şekilde azaltılmasına yol açar. Aynı zamanda, bu rafinaj maddesi belirli bir […]
Alüminyum teneke kutu geri dönüşümü için kullanılan akı maddeleri, metalin kullanım oranını artırır, fırın duvarlarına cüruf yapışmasını azaltır, fırının temizlenmesini ve onarımını kolaylaştırır ve çalışma ortamını iyileştirir. Alüminyum teneke kutu geri dönüşümü için kullanılan akı maddeleri, […] etkisiyle toz taşıyan arıtma tankı aracılığıyla alüminyumun alt katmanına eşit bir şekilde girer.
Foundry Fluxes for Dunkirk Aluminum are powdery particle that is in full contact with the molten metal. The gas and inclusions in the molten aluminum are brought to the surface of the molten aluminum through physical and chemical effects, and at the same time achieve the purpose of degassing and slag removal, and after a […]
Granular Fluxes can reduce emissions by up to 85% without significantly reducing performance, as they allow less flux to be used and make it work in a different way. It has been found that the form of flux has a very important influence on the type and quantity of emissions. In an increasingly environmentally conscious […]
Aluminum is a very active metal, which easily reacts with water vapor during the smelting process to generate hydrogen and oxide inclusions (Al2O3). These non-metallic inclusions are very harmful to the performance of aluminum products. Therefore, the purification of aluminum melt is one of the main ways to improve the quality of aluminum products. The […]
According to the actual production situation of cast rolling, the dissolved hydrogen is the most easily dissolved gas in molten aluminum, and its content accounts for 90% of the dissolved gas. Hydrogen is an important cause of porosity, loose strip and peeling in casting and rolling and the next process (aluminum alloy is easy to […]
The high-efficiency aluminum melting refining agent is mainly used to remove the hydrogen and floating oxidized slag in the aluminum liquid, so that the aluminum liquid is more pure, and the metal solvent also has the effect of removing slag. The principle is that some members of the molten aluminum refining agent are easy to […]
Aluminum cast flux is used in various aluminum alloy melts, and can be used in pure aluminum smelting, refining and slagging. In use, only the refining agent is sprinkled on the surface, then quickly dissolved in the liquid aluminum, and then fully stirred. If an ejector is used, it is better to inject the refining […]
The aluminium refining flux is white powder and granular. It is mixed according to a certain proportion after the drying of various inorganic salts. It plays an important role in the process of smelting aluminium. What is the role of the specific aluminium refining agent? Aluminium refining flux is mainly used to remove the hydrogen […]
Furnace cleaning flux is used to clean the hard slagging of the furnace, furnace wall, and bottom after aluminum and aluminum alloy smelting. The accumulation on the inner wall of the refractory material of the reverberatory furnace not only reduces the life of the refractory material, but also reduces the volume of the furnace, which […]
- 1
- 2
