Tag Archives: Molten Metal Ceramic Foam Filter

Alüminyum arıtma filtre kutusu, alüminyum folyo ve PS versiyonu dahil olmak üzere yurt içinde ve yurt dışında yaygın olarak kullanılmaktadır; tedarik, havacılık malzemeleri vb. alanlarda kullanılabilir. Sıvı alüminyumun filtrelenmesi, yüzey filtrasyonu ve iç filtrasyonu içerir. Yüzey filtrasyonu, katı safsızlıkların esas olarak filtre ortamının yüzeyinde birikmesini ifade eder. İç filtrasyon ise sıvı içindeki kalıntıları ifade eder […]

Investment casting is the process of forming metal or metal alloy products (also called castings) by solidifying molten metal. Precision casting is an important method for producing high-quality precision casting metal products in various industries. Castings usually contain unwanted materials called “inclusions.” The generation of inclusions can be attributed to the slag or scum material […]

AdTech provides a high-efficiency ceramic foam material for filtering molten metal, especially molten aluminum. The ceramic foam material is characterized by having a three-dimensional network structure with a plurality of interconnected voids surrounded by the net of the ceramic material with ceramic fibers. The air permeability of the filter is 400 to 8000×10 -7 cm […]

The ceramic foam filter has a network pore structure, has a certain strength, can withstand the pressure difference of the metal liquid level and the impact of the metal flow, but it is brittle and fragile. Because this material has a precise structure, uniform quality, and has a great surface area, so the ceramic filter […]

The technology of removing non-metallic inclusions in the molten aluminum alloy, adopting the furnace flux treatment, and the technology of molten alu foam ceramic filter filtration outside the furnace has long become an important method for the purification of molten aluminum. Reflected in the alloying, purification, and refinement processing technology of the smelting process. The […]

Using a 20 PPI ceramic foam filter to filter and purify A356 alloy, by observing the changes in the tensile properties and elongation of the alloy before and after purification, the following conclusions can be drawn: The filtration and purification of the 20ppi ceramic foam filter can improve the tensile strength and elongation of A356 […]

After using the ceramic foam filter for metal casting, the rectifying effect of the ceramic foam filter can be fully demonstrated. The molten metal flowing through the ceramic foam filter has a trickle and converges into the mainstream of laminar flow. The laminar flow state of molten metal fills smoothly, avoiding the secondary oxidation and […]

Foam ceramic filter board has advantages: high dimensional accuracy, high mechanical strength, stable chemical composition, corrosion resistance to liquid aluminum and its alloys, no phosphorus and environmental friendliness, purifying aluminum liquid, improving aluminum quality, reducing defects, reducing defective rate, reducing cost, increasing production efficiency, and using simple and flexible size from 40mm to 600mm to […]

When evaluating a ceramic foam filter for molten aluminum filtration, many buyers focus on pore size, dimensions, or price. However, the manufacturing process often has a greater impact on filtration efficiency than any specification listed on a datasheet. The quality of a ceramic foam filter is determined by raw material selection, slurry formulation, pore structure […]