Blog

Online purification equipment is an advanced melt purification method. The aluminum melt of primary aluminum, scrap, and remelted waste must be purified before being cast into ingots, slabs or rods. This can be accomplished by blowing non-chemically reactive gases such as nitrogen or argon into the aluminum melt. In most cases, a halogen gas is […]

When using a ceramic foam filter, the pore size of Ceramic Foam Filter Uses should be determined according to the quality requirements of the casting and the number of inclusions in the molten metal; the size of the filter should be determined according to the pouring speed and pouring weight. In order to ensure the […]

Ceramic foam filter for aluminum can be used in various casting alloys, and the product has been commercialized. This kind of filtration process has been widely promoted in industrially developed countries, and it has become the simplest and most effective method to improve the mechanical properties of castings and reduce pores and inclusions. The following […]

AdTech is a professional in ceramic foam filter manufacturers. The ceramic foam filter is made of continuous reticulated foam plastic as the framework, which is dipped in mud and then roasted at high temperatures. Therefore, the raw materials for making the filter plate are divided into foam and mud. The foam used in the production […]

Selection and Use Ceramic Foam Filter is important. In addition to considering the actual production requirements for the quality of aluminum products, the flow rate of aluminum in the launder, the total amount of filtration, the cleanliness of the aluminum itself, and the production cost should also be considered. Choosing a ceramic foam filter plate […]

Ceramic fiber filters filtration technology is one of the filtration technologies developed rapidly in recent years. Compared with the traditional granular filter material, the fiber filter material has larger specific surface area, larger interface adsorption, and can intercept suspended solids, so the filtration effect is good. Compared with foam ceramics, it has smaller pore size […]

Ceramic fiber board is made by wet vacuum forming process. The strength of Ceramic Fiber Board is higher than that of fiber blanket and vacuum forming felt. It is suitable for the high temperature field with steel strength requirements. Therefore, it has been widely used in machinery, metallurgy, chemical industry, petroleum, ceramics, glass, electronics and […]

In recent years, more and more ceramic fiber products have been used in iron and steel industry abroad, and their application scope is also expanding. The application of ceramic fiber lining in various industrial furnaces can save energy by 20% – 40%, and reduce the weight of industrial furnace by 90% and steel structure by […]

By adopting molten metal melt purification methods, equipment, and management measures, the quality of casting and rolling melts can be further improved. Molten Metal Purification can be realized through the following ways and methods. Molten Metal Purification Methods Melt transfer mode: Improve the melt transfer mode from melting furnace to static furnace, and replace the […]

At present, the quality level of aluminum foil products of the company is just the reflection of the quality level of cast rolling aluminum melt, which belongs to the second-class level compared with advanced manufacturers. In terms of Molten Metal Purification purification, it can basically meet the requirements for mass production of products. However, there […]