SEO

The yield rate of aluminum extrusions for construction in Indian aluminum plants has been low for a long time, and is unstable, and the die life is not high. After years of production practice and follow-up observation, it was found that the quality of the ingots during the casting process was not high, which affected […]

The high-efficiency aluminum melting refining agent is mainly used to remove the hydrogen and floating oxidized slag in the aluminum liquid, so that the aluminum liquid is more pure, and the metal solvent also has the effect of removing slag. The principle is that some members of the molten aluminum refining agent are easy to […]

Döküm alüminyum burç, erimiş alüminyumun kalıba girmesinden önceki önemli parçalardan biridir. Sıcak üst döküm, kalıbın üst kısmında iyi bir ısı yalıtım elemanı bulunan bir döküm yöntemidir; bu yöntem, kalıbın üst kısmının ilk aşamadaki soğumasını yavaşlatmak için kullanılır; bunun yerine […]

Aluminum silicate casting tip, also known as casting nozzle, is a key component to transport and distribute metal body directly to casting roll during continuous casting and rolling. It consists of upper and lower fans, several gaskets and side ears. Aluminum silicate casting tip is a refractory board made of ceramic fiber and silicon aluminum […]

The front box is actually a tundish. It consists of two connected containers. The outer shell is made of steel plate and inner lining by welding, and the shell is made of refractory material such as aluminosilicate clay or asbestos wool. In the casting rolling process, the liquid is stored and maintained at a certain […]

Aluminum cast flux is used in various aluminum alloy melts, and can be used in pure aluminum smelting, refining and slagging. In use, only the refining agent is sprinkled on the surface, then quickly dissolved in the liquid aluminum, and then fully stirred. If an ejector is used, it is better to inject the refining […]

The thermal insulation of refractory foundry coating depends not only on the thickness of the coating, but also on the porosity of the coating itself. The thickness of the coating has an optimum range. Experience shows that the thickness is generally about 150m-250m. The porosity of the coating is largely affected by the application method […]

The aluminum alloy liquid is refined and degassed by rotating degassing device, and the gas content of aluminum liquid is required to be less than 0.20 ml / 100 g al. After testing, the gas content in the aluminum alloy liquid is 0.16 ml / 100 g Al, which meets the technical requirements and does […]

Spain aluminum ceramic casting filter has high compressive strength and high volume stability at high temperature. It is compact, resistant to corrosion and penetration. High fire resistance Good thermal shock resistance. It has good resistance in quenching and high temperature environment, and can also resist chemical corrosion caused by chemical slag or solution. And the […]

AdTech Ceramic Foam Filter can effectively remove various impurities in molten aluminum. The sealing ceramic fiber gasket is attached around the filter plate to help seal the plate in the filter box and ensure that there is no molten aluminum on the sides. Transmittance detection of ceramic foam filters Pick up the ceramic foam filter, […]