Tag Archives: Filter Foam Manufacturers

Molten aluminum filtering with ceramic foam filter is the most effective way to remove nonmetallic slag from molten aluminum. In aluminum alloy casting, multilayer glass cloth filters or ceramic foam filters are usually used. No matter which molten aluminum filtering method is adopted, in order to ensure the normal molten aluminum filtration, the surface scum […]

CFF Filter Media is the final filtration step. This is a single-use disposable filter with a strictly controlled pore size. Due to their simple operation and good short-term results, these are usually the only filtration equipment in many foundries. The three key parameters of CFF filter media are: Filter area: the larger the area, the […]

The aluminum oxide foam ceramic filter plate can effectively remove inclusions from micron-sized fines in aluminum water and make aluminum water into stable laminar flow, which is good for punching. It has a unique mullite corundum structure, good mechanical strength, and chemical stability, superior aluminum water scouring performance, and strict control of pore size and […]

Aluminum alloy melting is the first process of aluminum alloy processing, and it is also a crucial link. The technology of alloying, purifying and refining is embodied in the melting process. Removal of non-metallic inclusions in aluminum alloy melts, treatment of flux in furnace and foam ceramic filtration outside the furnace have become an important […]

Ceramics are rarely completely dense, because in most cases, holes cannot be completely avoided. In fact, the existence of pores is one of the main factors affecting the service life of most convection ceramic products (such as tableware, sanitary ware and ceramic tiles). However, on the other hand, Porous Ceramics Filtration can be used in […]

CFF for Molten Aluminum is the most effective and reliable means to remove non-metallic inclusions in the aluminum melt, and is the most effective filtering method. The deep bed filter is large in size, it takes time and effort to install and replace the filter medium, and it is only suitable for the production of […]

Foam ceramic is a kind of porous material. Foam Filter Material for Aluminum Foundry is a third-generation porous ceramic product, developed after the first-generation common porous ceramics and the second-generation honeycomb porous ceramics. Its pore size ranges from nanometer to micrometer, and it has three-dimensional network structure and high porosity material characteristics, and the porosity […]

The ceramic foam casting filter can melt molten metal into a smooth, uniform, and clean liquid after the honeycomb holes. The unique honeycomb structure can adsorb some small particles on the surface. Remove impurities that cause surface problems, low strength, and hardness. Such as some non-metallic particles, slag, refractory fragments, etc., the stable metal laminar […]

Porous Ceramic Filter for Foundry is intended in particular for filtering aluminum alloys and other nonferrous metals for foundry and metallurgical applications at the temperatures up to 1350 °C. Porous Ceramic Filter for Foundry can be used for single metal filtering in the gating system of the mold, but they are intended even for permanent […]

40 PPI Cff manufacturer: Defect analysis and solutions for casting aluminum alloy ingots In the production process of cast aluminum alloy ingots, if improper control occurs, various product defects often occur, especially aluminum-silicon alloys such as ADC12 and A356. 40 PPI CFF Manufacturer gas and non-metallic inclusions in the ingot Non-metallic inclusions (slag inclusions) The […]