Fluxes

Flux for Dunkirk Aluminum is made of a variety of salt compounds by special process. Cast Aluminum Flux is widely used in the aluminum processing industry, the dual purification of aluminum and liquid by gas and flux is realized. Cast Aluminum Flux is used to smelt pure aluminum and various commonly used aluminum alloys. Flux […]

In the preparation process of aluminum and aluminum alloys, fluxes are used to remove alkali metals and alkaline earth metals. Aluminum alloys contain harmful alkali metals and alkaline earth metals. These harmful metals can be effectively removed by using MgCl2 and KCl fluxes. Metallurgists are well-known that certain alkali and alkaline earth metals can adversely […]

The salt flux for secondary aluminum melting can increase the direct recovery rate of aluminum during the remelting process. Aluminum and scrap aluminum, such as those used in beverage containers (UBCS), are processed in this way. The remelting of aluminum in the furnace is carried out under a layer of molten salt to prevent the […]

Η ροή αλουμινίου AdTech είναι λευκά (ελαφρώς γκρι) κονιώδη λεπτά σωματίδια και τα κύρια συστατικά είναι ενώσεις όπως το χλωριούχο και τα φθοριούχα άλατα. Μετά από κατάλληλη θερμική επεξεργασία και κοσκίνισμα, το μέγεθος των σωματιδίων είναι ομοιόμορφο και μπορεί να μεταφέρει αέριο στη διύλιση. Μπορεί επίσης να ψεκαστεί απευθείας στην επιφάνεια του λιωμένου μετάλλου και […]

Flux For Aluminum Melting is the solid substance (commonly mixtures of chloride and fluoride salts) used in aluminum foundries. Fluxes can reduce the melt oxidation, minimize penetration of the atmospheric Hydrogen, absorb non-metallic inclusions suspended in the melt, keep the furnace/ladle wall clean from the built up oxides, decrease the content of aluminum entrapped in […]

Fluxes in aluminum recycling can be used in a variety of aluminum alloy melts, can be used for aluminum smelting, degassing and deslagging. It is only necessary to sprinkle the refining agent on the surface during use, and then the refining agent is quickly dissolved in the aluminum liquid and then thoroughly stirred. If a […]

Flux for German aluminum recycling can improve the degassing and slag removal effect in molten metal. Flux is white with slightly gray powdery fine particles. The main ingredients are chloride and villiaumite, together with other compounds. After appropriate heat treatment and screening, it turns to a uniform size. Spray it with gas from the refining […]

KCI and NaCl are the most common basic components in aluminum alloy fluxes for recycled aluminum, mainly acting as covering agents. However, adding a small amount of fluoride salt to the chloride salt mixture is mainly used to clear the residue. At the same time, the chloride salt can enhance the ability of the slag […]

Fluxes for aluminum can recycling improve the utilization rate of metal, reduce the adhesion of slag on the furnace wall, the furnace is easy to clean and repair, and improve the working environment. The fluxes for aluminum can recycling uniformly enter the lower layer of aluminum through the powder-carrying refining tank under the action of […]

Fluxes for Sweden Aluminum Recycling are made from a variety of salt compounds through a special process. Spray it with nitrogen or argon as the carrier and spray it evenly into the aluminum melt, the double purification of aluminum and liquid by gas and flux is realized, and refining fluxes for Sweden aluminum recycling are […]