Tag Archives: Alumina Filter Ceramic Foam For Precision Casting Filter

Regarding foam ceramic filter products, the development began in the 1970s. After more than 30 years of rapid development, the materials of the products are silicon carbide, zirconia, alumina, graphite, etc.; application areas include casting Steel, cast iron, cast aluminum, cast copper filtration. The ceramic foam filter can greatly improve the surface quality and performance […]

Ceramic Foam Filters (CFF) for metal filtration have been used commercially in the foundry industry for more than forty years, are used to produce high-quality aluminum castings for applications such as the aerospace industry. In recent years, for the non-ferrous metal industry, ceramic foam filters for metal filtration have become more and more important in […]

The porous ceramic foam material is known to be particularly useful in filtering molten metal. This porous ceramic foam material is particularly useful for filtering molten metal for a variety of reasons, which are the excellent filtration efficiency, low cost, ease of use, and ability to use same on a disposable, throwaway basis. Molten metal, […]

Foam ceramic filters are commonly used for aluminum liquid filtration. When the molten aluminum passes through the pores in the Aluminum Casting Ceramic Foam Filter, the impurities inside are deposited on the walls of the pores under the action of fluid power, inertia, interception, collision, adsorption, etc., so that the clean molten aluminum enters the […]

Alumina ceramic foam filter is mainly used for filtering molten aluminum and aluminum alloys in foundries. Because they have excellent resistance to corrosion by molten aluminum, they can effectively remove inclusions, reduce trapped gas and provide laminar flow, and then the filtered metal is significantly cleaner. Cleaner metals can produce higher-quality castings, fewer scraps and […]

The molten aluminum foam ceramic filter has an open cell structure and a plurality of interconnected voids surrounded by a ceramic fiber mesh. The porous structure of the filter helps filter molten metal. The molten metal is poured into a ceramic foam filter to remove entrained solids from the molten metal. The air permeability of […]

Liquid metal filtration technology was developed in the 1970s and was first used in aluminum alloys. Due to the low melting point of aluminum alloy, the density of alloy and oxide is almost the same, and inclusions are difficult to float. The first generation product is woven filter, the second generation product is extruded straight […]

Alumina Ceramic Foam Filter Plate uses a three-dimensional network structure and connected foam organic foam as the carrier to invade the special ceramic slurry with thixotropy, and adopts special roll extrusion technology to make the ceramic slurry uniformly applied to the skeleton of the carrier, then drying and solidifying and baking at high temperature. Alumina […]

Ceramic fiber filtration technology is one of the faster-developing filtration technologies in recent years. Compared with the traditional granular filter material, the specific surface area of ​​the fiber filter material is larger, has a larger interface adsorption and can retain suspended matter, and the filtration effect is good. Compared with organic fiber filters, ceramic fibers […]

40 PPI Cff manufacturer: Defect analysis and solutions for casting aluminum alloy ingots In the production process of cast aluminum alloy ingots, if improper control occurs, various product defects often occur, especially aluminum-silicon alloys such as ADC12 and A356. 40 PPI CFF Manufacturer gas and non-metallic inclusions in the ingot Non-metallic inclusions (slag inclusions) The […]