Tag Archives: Foam Filter Manufacturers

Regardless of the filter used, care must be taken to ensure that the filter is not affected by excessive vibration or changes in the metal level. These interferences will cause the release of inclusions, which may eventually lead to inclusions in the finished product. Good process control downstream of the final aluminum alloy filtration equipment […]

AdTech provides a high-efficiency ceramic foam material for filtering molten metal, especially molten aluminum. The ceramic foam material is characterized by having a three-dimensional network structure with a plurality of interconnected voids surrounded by the net of the ceramic material with ceramic fibers. The air permeability of the filter is 400 to 8000×10 -7 cm […]

Foam ceramic filter is the last technology for molten aluminum filtration. It is particularly important to choose the foam ceramic filter board. According to the environment of each foundry, choose the best ceramic foam filter and obtain high cleanliness of molten aluminum. The choice of foam ceramic filter plate depends on the impurity content in […]

AdTech ceramic foam filters are specially used to filter impurities in molten aluminum. It can effectively remove large inclusions in molten aluminum and adsorb micron-sized particles of inclusions, which can improve surface quality, product performance, and microstructure, thereby increasing the yield. Ceramic foam filter is widely used in the production fields of aluminum profile, aluminum […]

Using a 20 PPI ceramic foam filter to filter and purify A356 alloy, by observing the changes in the tensile properties and elongation of the alloy before and after purification, the following conclusions can be drawn: The filtration and purification of the 20ppi ceramic foam filter can improve the tensile strength and elongation of A356 […]

Ceramic foam filter of aluminum is used to remove the oxide inclusions and provide high-quality molten aluminum for the casting process. Before the ceramic foam filter (CFF) filters the molten aluminum, it is necessary to fully preheat the ceramic sheet and the filter box to ensure that the molten aluminum can pass through the filter […]

Porous ceramic filters filtration efficiency mainly has filtration accuracy, which refers to the particle size of the smallest solid impurity particles in the fluid medium. For ceramic filters, the filtration accuracy can reach 0.1Lm. The main factor that affects the porous ceramic filters filtration efficiency is the maximum pore diameter of porous ceramic filter elements. […]

Ceramic foam can be divided into two categories, namely, open hole (net) ceramic material and closed-cell ceramic material, depending on whether each hole has a solid wall. If the foam solid is only included in the hole, it is called an open hole ceramic material whose pores are interconnected. If there is a wall surface, […]

Porous Ceramic Filter Filtration can remove alumina and other nonmetallic compounds, such as lithium oxide from the molten aluminum lithium alloy. The porous ceramic filter may be a cellular structure or a foam with interconnect pores. As everyone knows, in order to remove alumina from molten aluminum or aluminum alloy, aluminum or aluminum alloy is […]

Cake filtration is the most common mechanism in which the foam ceramic foundry filters acts as a sieve and retains particles larger than its pore size on the surface of the filter. These retained particles then form a screen and capture particles smaller than the filter aperture. As the cake accumulates on the surface of […]