Blog

Aluminum Plate Foundry Filter is an advanced product used for molten metal secondary refining. It has a porous structure network. With the continuous deposition of fluid inclusions, the size of the sieve holes and sieve holes becomes smaller and smaller, thereby improving the filtering effect. The type of CFF metal filtration can be divided into […]

Ceramic Foam Filters Research: Since the CFF for aluminum melt filtration is successfully developed by using organic foam impregnation in 1978, it has been rapidly promoted in the aluminum industry due to its low cost, high porosity, high filtration efficiency, and strong adaptability. Developed countries have developed early research and development of CFF for aluminum, […]

In modern aluminum melt purification process, aluminum melt filters filtration is the last purification treatment process before casting. Prior to this, through furnace refining, standing, medium and non-medium adsorption, etc., although 60% to 80% of the inclusions and gases have been removed, there are still more fine inclusions dispersed in the melt. In order to […]

Ceramic foam is a good example of a filter medium that is used as a depth filter from the beginning and as a cake filter at the end of its “service life”. The two-stage ceramic foam filter system uses two standard ceramic foam filters in series to provide higher filtration efficiency while retaining all the […]

The deep bed filtration depends on the tortuous path through which the melt must flow. The deep bed filtration efficiency is inversely proportional to the size of the filter particles and directly proportional to the depth of the filter bed. Inclusions are deposited both on the particles and in the gaps between the filter media. […]

Ceramic foam filter molten Alu filtration is used for the filtration of molten aluminum and non ferrous alloy. Alumina ceramic foam filters are mainly used for the filtration of aluminum and alloys in foundries and cast houses. Ceramic foam filter molten Alu filtration has the excellent resistance to attack and corrosion from molten aluminum, the […]

Recycled scrap aluminum includes metals from scrap metal products, which are collected and used to make other metal products. For example, used beverage cans (UBC) waste is metal collected from used beverage cans and similar products, which can be recycled and reused in other metal products. UBC aluminum scrap is usually a mixture of various […]

Ceramic foam filter aluminum alloys filtration adopts a three-dimensional network structure and uses organic foam with interconnected pores as a carrier to penetrate the thixotropic alumina material slurry. The full-automatic extrusion process with square correction of the center distance is adopted to make the slurry evenly spread on the foam skeleton of the carrier. After […]

The molten metal filtering equipment is located behind the furnace. The flux gas is introduced into the melt through the inlet, and flows countercurrent to the melt through filtration. The filter plate is used to decompose the flux gas into fine dispersions to ensure complete contact with the melt. The filter plate used is made […]

Molten metals such as aluminum and aluminum alloys are expected to remove large amounts of impurities during the refining process. In a known refining process, aluminum is melted in a furnace and then transferred to a casting machine for metal forming. Aluminum is usually transferred from the furnace to the casting machine through the trough. […]