It is important to have a Flux in Recycled Aluminum that separates the metal from the waste. The secondary aluminum industry is concerned with the production of aluminum from slag, scum, and waste. Therefore, the recycled aluminum contains impurities and oxides, which must be separated during the melting process to separate valuable metals. The waste […]
When the aluminum alloy melts, the molten metal refining flux is used to eliminate the hydrogen that forms the hole during the solidification of the molten aluminum alloy, and cleans the molten aluminum alloy by eliminating non-metallic inclusions that cause internal defects. The recovered scrap is melted in the molten metal by the melting process, […]
The AdTech flux for aluminum casting is usually added to the furnace, crucible, ladle during the melting, heat preservation or degassing of aluminum. The raw material quality of the flux, the adding method and the product form all affect the efficiency. The flux formulation will vary based on its use and other process variables (such […]
All kinds of metal products are used around us, including steel products and aluminum products. In many home decoration processes, aluminum profiles are used, and refining agents are added in the process of smelting aluminum. What is the role of aluminium refining agent? Why add refining agent? Presumably, this is a problem that many friends […]
Flux purification for molten aluminum is an important part of melt purification. It is one furnace purification method, is the basic guarantee for melt purification. When the flux acts on the surface of the aluminum melt, the flux will absorb the scum on the surface of the melt and play a role in removing slag. […]
Aluminum melt flux cleaning process can be combined with rotary gas purging. In this process, the best degassing, oxide removal and slag reception with low aluminum content are ensured. In the absence of aluminum melt flux, this rotary treatment is less effective for the removal of oxides and results in the formation of slag with […]
Refining flux for molten aluminum is used in furnace by most foundries. The refining of molten aluminum refers to the removal of gas and inclusions in aluminum alloy. As the two processes of aluminum alloy smelting and refining are mostly combined together, they are called refining in production practice. Because the gas in aluminum alloy […]
Foundry flux is widely used in the production of primary aluminum and secondary aluminum to improve the quality of the melt and the recovery rate of metal aluminum. In the process of aluminum and aluminum alloy smelting, hydrogen and oxide inclusions are the main substances that pollute the aluminum melt. Aluminum is very easy to […]
Refining agent degassing is currently the most commonly used method in aluminum plants to eliminate pinholes in aluminum alloy castings. In order not to cause a large amount of splashing of the aluminum liquid, the degassing agent can be added in batches, and the degassing ends the slag removal. When aluminum alloy is smelted, it […]
In the smelting process of aluminum and aluminum alloys, hydrogen and oxidized inclusions are the main substances polluting the aluminum melt. Aluminum easily forms A1202 or sub-alumina (Al2O and A10) with oxygen. At the same time, it is also very easy to absorb gas (H) whose content accounts for 70-90% of the total gas in […]
- 1
- 2
