Blog

Online molten aluminium degassing purification device has always been the subject of aluminum alloy casting and rolling research. In the melting process of aluminium alloy, due to incomplete degassing, excess gas (mainly hydrogen) remaining in the melt is retained in the aluminum ingot. If the hydrogen content is too high, bubbles will form in the […]

Ceramic filter for aluminium is available in square and custom geometric shapes. The most common porosity is 10ppi, 20ppi, 30ppi, 40ppi, 50PPI, 60PPI. Advantages of Ceramic Filter for Aluminium The porosity of the casting is reduced, the flow pattern during the casting is reduced, the surface defects are reduced, and the final product rate is […]

Ceramic foam filters for molten metal are the most widely used in the area of aluminum melt filtration. The advantage of ceramic foam filter is a high porosity, high filtration efficiency, easy to replace, low cost, adaptability, which can also be isolated by filtration of solid inclusions portion of the liquid inclusions. Inclusion formation and […]

AdTech aluminum liquid filter uses a three-dimensional network structure and an organic bubble that communicates with the pores as a carrier, invading it into the thixotropic alumina material slurry, and adopting a square-corrected center-distance automatic extrusion process. The slurry is uniformly applied to the foam skeleton of the carrier, and is baked and solidified at […]

Ceramic Foam Filter (CFF) for aluminum casting is mainly for the filtration of aluminum and alloys in foundries and cast houses. With the excellent resistance to attack and corrosion from molten aluminum, the filter can effectively remove inclusions, reduce trapped gas and provide laminar flow, and then the filtered metal is significantly cleaner. Cleaner metal […]

The wetting behavior between molten aluminum and substrates made from industrial Al2O3 and SiC based ceramic foam filters (CFFs) was investigated in the foundry. The same CFF filters were also tested in plant scale filtration experiments. The wetting experiment results show that the SiC-based filter material is better wetted by liquid aluminum than the Al2O3 […]

Aluminum factory ceramic foam filter is suitable for the production of high quality and high requirements aluminum sheet and foil. Through physical adsorption and chemical action, it can effectively remove various oxidation inclusions generated during the aluminum smelting process, thereby reducing casting defects and improving casting quality. The next deep processing provides quality materials. Aluminum […]

The filtration efficiency of the alumina ceramic foam filter of the aluminum plant is closely related to its proper installation and use. At the same time, it is not possible to ignore the conventional and necessary measures taken to reduce the occurrence of inclusions in the process operations such as smelting, furnace treatment, and casting, […]

Alumina ceramic foam filter is mainly applied for filtration of aluminum and aluminum alloys in foundries and cast houses. With their excellent resistance to attack and corrosion from molten aluminum, they can effectively remove inclusions, reduce trapped gas and provide laminar flow, and then the filtered metal is significantly cleaner. Cleaner metal results in higher-quality […]

Aluminum foundry ceramic foam filter uses a three-dimensional network structure and an organic bubble connected to the pores as a carrier to invade the thixotropic alumina material slurry using a square calibration center. From the automatic extrusion process, the slurry is uniformly applied to the bubble skeleton of the carrier, and is baked and solidified […]