Aluminum melt flux cleaning process can be combined with rotary gas purging. In this process, the best degassing, oxide removal and slag reception with low aluminum content are ensured. In the absence of aluminum melt flux, this rotary treatment is less effective for the removal of oxides and results in the formation of slag with […]
Deslagging Flux has the ability to absorb inclusions to float to the surface of the molten aluminum and form dry slag. The compound in the flux reacts with the impurities in the aluminum liquid, so that the oxide becomes more stable, and it is easy to generate high-temperature oxides with a smaller affinity for molten […]
Multi-function refining flux is an important auxiliary material in aluminum alloy smelting. At present, the main components of flux on the market are chloride and fluoride. Among them, chloride has a strong water absorption and is easily affected by moisture. Therefore, the raw materials used for flux production must be dried, water must be completely […]
Aluminum degassing units can reduce gas accumulation and problems and achieve the highest refining efficiency. Online degassing unit adopts advanced high silicon melting technology to get a long service time, degassing rotor, heater protection thimble and thermocouple protection thimble adopt ceramic manufacturing technology. Aluminum degassing units are used for hydrogen (H) and slags removal from […]
Aluminium Degassing Process: In addition to hydrogen, it is necessary to prevent moisture and various dirt from entering the crucible or furnace, but also to eliminate oxide inclusions and hydrogen in the aluminum liquid. Because only by effectively removing the dispersed inclusions suspended in the molten aluminum, can the molten aluminum be prevented from increasing […]
Aluminum Refining Flux should be added in proportion. The aluminum refining agent is generally 0.3% of aluminum alloy. Method Use a seamless steel pipe inserted 20cm from the bottom of the molten aluminum, and spray the refining agent with nitrogen or argon. After the refining spray, the nitrogen or argon is blown for another 15-20 […]
The surface of the aluminum material has an uneven thickness of the oxide film, sometimes also absorbs water, is mixed with sand, sticky with oil stains, and painted with paint. When melting, the aluminum material is further oxidized in a high-temperature environment, the thickness of the oxide film increases, and it reacts with moisture to […]
Turbulence or agitation of the melt and increased holding temperature significantly increase the rate of hydrogen solution, oxidation, and transient element loss. The mechanical properties of aluminum alloys depend on casting soundness, which is strongly influenced by hydrogen porosity and entrained nonmetallic inclusions. The aluminum foundry needs to degas and filter inclusions by Online Degassing […]
Aluminum alloy smelting is one of the most important process links for the production of high-quality casting rods. Flux refining process for aluminum is an important process in aluminum alloy smelting. The main components of fluxes currently on the market are chlorides and fluorides. If the process is not properly controlled, slag, pores, coarse grains, […]
Alu Refiner is made of a variety of salt compounds by special process, using a refining powder sprayer with nitrogen as a carrier, and evenly spraying it into the aluminum liquid, thereby achieving double purification of the melt by gas and flux. This product is in aluminum It is widely used in the processing industry. […]
