Tag Archives: Ceramic Filter Foundry

Foam ceramic filter is the last technology for molten aluminum filtration. It is particularly important to choose the foam ceramic filter board. According to the environment of each foundry, choose the best ceramic foam filter and obtain high cleanliness of molten aluminum. The choice of foam ceramic filter plate depends on the impurity content in […]

A lot of practice shows that the use of foam ceramic filter material can remove inclusions, improve the structure of castings, improve the mechanical properties and pass rate of castings, improve the processing performance of castings and reduce machining costs. Foam ceramics have a good filtering effect and no pollution to the alloy. However, if […]

Filtering of Molten Aluminum is a method of removing impurities by letting the aluminum alloy melt pass through a filter made of neutral or active materials, so as to separate solid inclusions suspended in the melt. According to the filtering properties, it can be divided into two categories. The filtering method of molten aluminum can […]

Aluminum liquid filtration generally uses foam ceramic filter filtration. When the aluminum liquid passes through the tortuous and interconnected pores in the foam ceramic, the internal debris is deposited on the wall of the pore under the action of fluid power, inertia, interception, collision, and adsorption. So that the clean aluminum liquid enters the casting […]

In the late 1970s, the United States made a sponge-like ceramic foam filter (CFF) made of alumina and chromium oxide. CFF filter for molten aluminum not only has good purification technology, but also is easy to use. The initial pressure difference through the melt is only 100-150mm, and once it passes, it only needs to […]

Ceramic foam filter for molten metal filtration is used as a means of separating finely divided solid impurities suspended in the melt. For this purpose, it is recommended to use a refractory bed, compacted loose filter material block or screen. It has also been proposed that ceramic foam filter can be used as a filter […]

Porous ceramic filters filtration efficiency mainly has filtration accuracy, which refers to the particle size of the smallest solid impurity particles in the fluid medium. For ceramic filters, the filtration accuracy can reach 0.1Lm. The main factor that affects the porous ceramic filters filtration efficiency is the maximum pore diameter of porous ceramic filter elements. […]

The pressure drop or alternative flow reduction caused by the Ceramic Filter for Aluminium Foundry is affected by the length of the Filters, the roughness of the filter and the effective filter area. The effect of filters on mold filling behavior has been evaluated by direct observation experiments. Direct observation is a very useful way […]

Foam ceramic filter board has advantages: high dimensional accuracy, high mechanical strength, stable chemical composition, corrosion resistance to liquid aluminum and its alloys, no phosphorus and environmental friendliness, purifying aluminum liquid, improving aluminum quality, reducing defects, reducing defective rate, reducing cost, increasing production efficiency, and using simple and flexible size from 40mm to 600mm to […]

Ceramic filter filtration is becoming more and more common because people have higher and higher requirements for the quality of aluminum products. The ceramic filter for casting can not only effectively remove a large number of oxide inclusions in molten aluminum, but also filter out a few microns of small inclusions which can not be […]