NEWS

Most Bahrain Aluminium Casting Flux is based on a mixture of KCl and NaCl, which forms a low-temperature (665°C) eutectic. Another common ingredient in fluxes is NaF, which forms a ternary eutectic with KCl and NaCl with a melting point of 607°C. A common cover flux contains about 47.5% NaCl, 47.5% KCl, and 5% fluoride salt. A low melting point is important since it will improve the fluidity of th ...
Read More…

Flux For Aluminum Melting is the solid substance (commonly mixtures of chloride and fluoride salts) used in aluminum foundries. Fluxes can reduce the melt oxidation, minimize penetration of the atmospheric Hydrogen, absorb non-metallic inclusions suspended in the melt, keep the furnace/ladle wall clean from the built up oxides, decrease the content of aluminum entrapped in the dross, remove hydrog ...
Read More…

Fluxes in aluminum recycling can be used in a variety of aluminum alloy melts, can be used for aluminum smelting, degassing and deslagging. It is only necessary to sprinkle the refining agent on the surface during use, and then the refining agent is quickly dissolved in the aluminum liquid and then thoroughly stirred. If a jet is used, it is better to use an inert gas to inject the refining agent, ...
Read More…

Flux for German aluminum recycling can improve the degassing and slag removal effect in molten metal. Flux is white with slightly gray powdery fine particles. The main ingredients are chloride and villiaumite, together with other compounds. After appropriate heat treatment and screening, it turns to a uniform size. Spray it with gas from the refining jar as the carrier, sprinkling it directly to t ...
Read More…

KCI and NaCl are the most common basic components in aluminum alloy fluxes for recycled aluminum, mainly acting as covering agents. However, adding a small amount of fluoride salt to the chloride salt mixture is mainly used to clear the residue. At the same time, the chloride salt can enhance the ability of the slag cleaning agent to adsorb oxidation inclusions. Refining fluxes for recycled alumin ...
Read More…

The Flux for Aluminium Recycling is mainly used to remove the hydrogen inside the aluminum liquid and the floating oxidized slag, so that the aluminum liquid is purer and has the function of clearing slag. Some components in the refining flux are easily decomposed at high temperature, and the generated gas is easy to react with hydrogen, and has strong adsorption force with slag and quickly escape ...
Read More…

Flux for Brazil Aluminium uses the principle of combining metal and liquid compounds to develop and configure products to reduce smoke and dust, reduce combustion, and be environmentally friendly and economical. Flux for Brazil Aluminium is sprayed by a carrier gas (nitrogen or argon) to the bottom of the molten pool, thereby forming a large number of bubbles in the aluminum liquid. The bubbles fl ...
Read More…

Fluxes for aluminum can recycling improve the utilization rate of metal, reduce the adhesion of slag on the furnace wall, the furnace is easy to clean and repair, and improve the working environment. The fluxes for aluminum can recycling uniformly enter the lower layer of aluminum through the powder-carrying refining tank under the action of carrier gas (N or Ar). Through physical and chemical cha ...
Read More…

Flux for Aluminum Packaging Recycling is a white powder or granule with uniform particle size. Its main components are chloride salt and fluoride salt. After proper heat treatment and sieving, it is beneficial for the nitrogen in the refining tank to enter the lower layer of molten aluminum uniformly through physical and chemical changes. It is economical and can meet the production of aluminum pr ...
Read More…

Flux for India Aluminum Recycling is mainly used to remove hydrogen and scum in aluminum water, as well as the high-temperature melt refining and purification treatment of aluminum alloy. Its basic function is to remove internal inclusions and hydrogen in the high-temperature melt. The aluminum alloy refining flux is sprayed to the bottom of the molten pool through carrier gas (nitrogen or argon), ...
Read More…