Tag Archives: 30 Ppi Foam

CFF for Molten Aluminum is the most effective and reliable means to remove non-metallic inclusions in the aluminum melt, and is the most effective filtering method. The deep bed filter is large in size, it takes time and effort to install and replace the filter medium, and it is only suitable for the production of […]

Foam ceramic is a kind of porous material. Foam Filter Material for Aluminum Foundry is a third-generation porous ceramic product, developed after the first-generation common porous ceramics and the second-generation honeycomb porous ceramics. Its pore size ranges from nanometer to micrometer, and it has three-dimensional network structure and high porosity material characteristics, and the porosity […]

The ceramic foam casting filter can melt molten metal into a smooth, uniform, and clean liquid after the honeycomb holes. The unique honeycomb structure can adsorb some small particles on the surface. Remove impurities that cause surface problems, low strength, and hardness. Such as some non-metallic particles, slag, refractory fragments, etc., the stable metal laminar […]

Porous Ceramic Filter for Foundry is intended in particular for filtering aluminum alloys and other nonferrous metals for foundry and metallurgical applications at the temperatures up to 1350 °C. Porous Ceramic Filter for Foundry can be used for single metal filtering in the gating system of the mold, but they are intended even for permanent […]

The ceramic filters for foundry use filtration technology to reduce impurities and inclusions in the molten aluminum before casting. The quality of the liquid aluminum treatment will affect the product quality of the ingot, which in turn affects the product quality of the subsequent processed materials. Therefore, the ceramic filter for foundry technology is an […]

The ceramic foam filter for casting can effectively remove large inclusions in the liquid aluminum, and absorb micron-sized fine inclusion particles. It plays a role in improving surface quality, product performance, microstructure, and yield. Molten aluminum filters are widely used in aluminum profiles, aluminum foil, aluminum alloy and other production fields. The foam filter uses […]

Inclusions and gases in the metal have a significant impact on the strength, fatigue resistance, corrosion resistance, stress corrosion cracking performance. Effectively controlling the oxidized inclusions in the melt can improve the quality of cast rods and rolled plates, it has become a common goal pursued by metallurgy, foundry and materials industry in various countries. […]

The application of metal is wide in human life, covering almost all fields. With the enhancement of environmental awareness and healthy living standards, people have higher requirements for the performance of castings. High-quality metal products are also widely recognized for their excellence. At the same time, the continuous development of science and technology has also […]

The filtration efficiency of the porous alumina plate is closely related to its correct installation and use. At the same time, it is also necessary to prevent the phenomenon of recontamination of the clean aluminum liquid after filtration. How to Install Porous Alumina Plate Need to pay attention to the following points: 1. Correct selection […]

Alumina foam ceramic filter plate can effectively remove all kinds of inclusions with the micron level in aluminum water. So that the aluminum water becomes a steady laminar flow, which is conducive to filling. The ceramic foam filter has a unique mullite-corundum structure, good mechanical strength and chemical stability, and excellent resistance to aluminum erosion. […]