Tag Archives: Alumina Ceramic Foam Filter

Ceramic foam filter is a very good product, which is widely used in molten aluminum filtration in aluminum smelting and casting process to prevent particulate impurities in molten aluminum from entering the casting billet and affecting the quality of aluminum processed products. According to the quality requirements of the castings, the flow rate of the […]

The molten metal filtration system is still an area of concern. Relative to some applications, some existing systems have various advantages and disadvantages. Therefore, there is still a need to make further contributions in this technical field. Casting processes (such as investment casting and other casting processes) produce parts by pouring a liquid (usually metal) […]

Regardless of the filter used, care must be taken to ensure that the filter is not affected by excessive vibration or changes in the metal level. These interferences will cause the release of inclusions, which may eventually lead to inclusions in the finished product. Good process control downstream of the final aluminum alloy filtration equipment […]

Foam ceramic filter is the last technology for molten aluminum filtration. It is particularly important to choose the foam ceramic filter board. According to the environment of each foundry, choose the best ceramic foam filter and obtain high cleanliness of molten aluminum. The choice of foam ceramic filter plate depends on the impurity content in […]

AdTech ceramic foam filters are specially used to filter impurities in molten aluminum. It can effectively remove large inclusions in molten aluminum and adsorb micron-sized particles of inclusions, which can improve surface quality, product performance, and microstructure, thereby increasing the yield. Ceramic foam filter is widely used in the production fields of aluminum profile, aluminum […]

Ceramic foam filter of aluminum is used to remove the oxide inclusions and provide high-quality molten aluminum for the casting process. Before the ceramic foam filter (CFF) filters the molten aluminum, it is necessary to fully preheat the ceramic sheet and the filter box to ensure that the molten aluminum can pass through the filter […]

Ceramic foam can be divided into two categories, namely, open hole (net) ceramic material and closed-cell ceramic material, depending on whether each hole has a solid wall. If the foam solid is only included in the hole, it is called an open hole ceramic material whose pores are interconnected. If there is a wall surface, […]

Metal foam filter manufacturing process uses the web polyurethane foam as the carrier, makes the foam plastics evenly soaked to infiltrate the ceramic slurry, and then repeatedly squeezes the foam plastics to remove the excess slurry, so that the ceramic particles are fully removed. Evenly attached to the top of the foam plastic. Finally, it […]

The aluminum oxide foam ceramic filter plate can effectively remove inclusions from micron-sized fines in aluminum water and make aluminum water into stable laminar flow, which is good for punching. It has a unique mullite corundum structure, good mechanical strength, and chemical stability, superior aluminum water scouring performance, and strict control of pore size and […]

CFF for Molten Aluminum is the most effective and reliable means to remove non-metallic inclusions in the aluminum melt, and is the most effective filtering method. The deep bed filter is large in size, it takes time and effort to install and replace the filter medium, and it is only suitable for the production of […]