Tag Archives: Metal Transfer Runner System

The most advanced technology for transporting molten metal from the furnace to the support and die casting machine is in the heated launder system. The casting launder minimizes turbulence and oxides in the molten metal. Molten metal launder system has a covering layer to prevent dangerous and expensive leaks, and is gently heated to maintain […]

The lining material of the molten aluminum launder and trough is made of high-density molten silicon sintered, and the anti-aluminum infiltration material is added to improve the service life of the launder. At the same time, it has a small thermal expansion coefficient, better thermal shock resistance, and rapid cold and rapid heat resistance. Microporous […]

Ceramic launder system is an important step in aluminum casting. The transfer method of molten aluminum in the production of aluminum alloy smelting is also a factor affecting the melt quality. Under industrial production conditions, the following test results have been obtained: (1) Transfer the ladle into the injection. Firstly, the molten aluminum alloy melted […]

In the aluminum processing industry, it needs equipment to re-injected liquid metal from smelting furnaces to holding furnaces. So that the liquid metal can flow between the equipment according to the process steps. The current general practice is to arrange a flow channel between the devices, the flow channel is connected to the aluminum liquid […]

Metal Transfer Runner System is also called Ceramic Launder, Casting Launder.  It is a silicic acid fiber product, and mainly suitable for liquid aluminum distribution and transmission. Casting Launder has higher requirements for heat preservation. AdTech casting launder size can be customized according to customer requirements. The Ceramic Launder adopts silicon and calcium materials. It […]