In order to cooperate with the cooling and increasing speed of casting and rolling, based on the increase of the nozzle roll gap, the flow pattern of the nozzle must be improved to make the flow field, temperature field and concentration field in the tip cavity uniform. Due to the cooling and increasing speed of […]
Due to the uneven contact surface between the casting nozzle and the upper and lower rolls during installation, the casting nozzle partially contacts the roll surface tightly, resulting in strong friction, obvious traces on the roll surface, and white stripes on the plate surface. Therefore, when installing the casting nozzle, you must pay attention to […]
The Aluminum Silicate Ceramic Caster Tip is a key component for directly distributing and conveying aluminum liquid to the roll gap during the casting and rolling process. The rationality and practicability of the structure and the selection of the material of the casting nozzle are carried out normally to stabilize the various process parameters and […]
Aluminum Ceramic Fiber Nozzle Cavity improves the uniformity of the melt distribution in the nozzle device by the split block inside the nozzle device, and improves the quality of the cast and rolled products. This aluminum plate casting device includes: two upper and lower plates oppositely arranged, an edge baffle connecting the two upper and […]
Although there are long research and trials for producing the wire or rod of commercial the high-strength aluminum alloy, there are few companies with the success in producing commercial hard-aluminum alloys wire and rod by Continuous Casting and Rolling process. In the continuous casting process, molten metal is fed through the Refractory Ceramic Fiber Castertip, […]
- 1
- 2
