Tag Archives: 10 Ppi Foam Filter

Investment casting is the process of forming metal or metal alloy products (also called castings) by solidifying molten metal. Precision casting is an important method for producing high-quality precision casting metal products in various industries. Castings usually contain unwanted materials called “inclusions.” The generation of inclusions can be attributed to the slag or scum material […]

AdTech provides a high-efficiency ceramic foam material for filtering molten metal, especially molten aluminum. The ceramic foam material is characterized by having a three-dimensional network structure with a plurality of interconnected voids surrounded by the net of the ceramic material with ceramic fibers. The air permeability of the filter is 400 to 8000×10 -7 cm […]

The ceramic foam filter has a network pore structure, has a certain strength, can withstand the pressure difference of the metal liquid level and the impact of the metal flow, but it is brittle and fragile. Because this material has a precise structure, uniform quality, and has a great surface area, so the ceramic filter […]

The technology of removing non-metallic inclusions in the molten aluminum alloy, adopting the furnace flux treatment, and the technology of molten alu foam ceramic filter filtration outside the furnace has long become an important method for the purification of molten aluminum. Reflected in the alloying, purification, and refinement processing technology of the smelting process. The […]

Using a 20 PPI ceramic foam filter to filter and purify A356 alloy, by observing the changes in the tensile properties and elongation of the alloy before and after purification, the following conclusions can be drawn: The filtration and purification of the 20ppi ceramic foam filter can improve the tensile strength and elongation of A356 […]

Foam ceramic filter board has advantages: high dimensional accuracy, high mechanical strength, stable chemical composition, corrosion resistance to liquid aluminum and its alloys, no phosphorus and environmental friendliness, purifying aluminum liquid, improving aluminum quality, reducing defects, reducing defective rate, reducing cost, increasing production efficiency, and using simple and flexible size from 40mm to 600mm to […]

With the development of science and technology, the requirements for aluminum and its alloy materials are getting higher and higher, and the traditional refining and degassing process cannot remove the tiny non-metallic inclusions in the aluminum melt. Therefore, many people have studied the purification methods, which can be divided into adsorption purification, physical purification and […]