Casting nozzles have been made of various refractory materials. The part of the nozzle in contact with the molten metal is a refractory material composed of silica, asbestos, sodium silicate and lime. Although the refractory nozzle exhibits good thermal insulation and low heat capacity, it is not very uniform in terms of chemical composition and […]
Aluminum silicate casting tip, also known as casting nozzle, is a key component to transport and distribute metal body directly to casting roll during continuous casting and rolling. It consists of upper and lower fans, several gaskets and side ears. Aluminum silicate casting tip is a refractory board made of ceramic fiber and silicon aluminum […]
In order to cooperate with the cooling and increasing speed of casting and rolling, based on the increase of the nozzle roll gap, the flow pattern of the nozzle must be improved to make the flow field, temperature field and concentration field in the tip cavity uniform. Due to the cooling and increasing speed of […]
The Aluminum Silicate Ceramic Caster Tip is a key component for directly distributing and conveying aluminum liquid to the roll gap during the casting and rolling process. The rationality and practicability of the structure and the selection of the material of the casting nozzle are carried out normally to stabilize the various process parameters and […]
Adtech is a company that specializes in the development and production of new types of materials for the production of plugs and Aluminum Casting Tube For Aluminum (also known as drop tubes). Since 2012, the company has developed and produced series of flow control products: stopper rods are used in conjunction with products such as […]
Although there are long research and trials for producing the wire or rod of commercial the high-strength aluminum alloy, there are few companies with the success in producing commercial hard-aluminum alloys wire and rod by Continuous Casting and Rolling process. In the continuous casting process, molten metal is fed through the Refractory Ceramic Fiber Castertip, […]
Insulated Launder is placed in the liquid inlet or liquid outlet of the smelting furnace. Insulated Launder is also called Refractory Troughs, Molten Metal Transfer. AdTech provides many different refractory troughs for transporting molten aluminum. We make our own material and offer molds per your shape design. Our molten metal trough can be designed for […]
AdTech’s Trough and Launder industry has accumulated many years of research and accumulation. Based on the survey results of key enterprises in the industry and consulting experts, the system has summarized the application strategies of high-alloy DC tank products, including new product development strategies and optimized combination strategies. , life cycle strategy, marketing strategy, brand […]
In the aluminum processing industry, it needs equipment to re-injected liquid metal from smelting furnaces to holding furnaces. So that the liquid metal can flow between the equipment according to the process steps. The current general practice is to arrange a flow channel between the devices, the flow channel is connected to the aluminum liquid […]
