Tag Archives: Aluminum Casting Filters

Investment casting is the process of forming metal or metal alloy products (also called castings) by solidifying molten metal. Precision casting is an important method for producing high-quality precision casting metal products in various industries. Castings usually contain unwanted materials called “inclusions.” The generation of inclusions can be attributed to the slag or scum material […]

AdTech provides a high-efficiency ceramic foam material for filtering molten metal, especially molten aluminum. The ceramic foam material is characterized by having a three-dimensional network structure with a plurality of interconnected voids surrounded by the net of the ceramic material with ceramic fibers. The air permeability of the filter is 400 to 8000×10 -7 cm […]

Using a 20 PPI ceramic foam filter to filter and purify A356 alloy, by observing the changes in the tensile properties and elongation of the alloy before and after purification, the following conclusions can be drawn: The filtration and purification of the 20ppi ceramic foam filter can improve the tensile strength and elongation of A356 […]

The liquid metal filter was developed in the 1970s. The liquid metal purification technology was first applied to aluminum alloys. Because the melting point of aluminum alloys is low, the density of alloys and oxides are close, and inclusions are difficult to float. Inclusions are the most common casting defect. In casting production, many process […]

After using the ceramic foam filter for metal casting, the rectifying effect of the ceramic foam filter can be fully demonstrated. The molten metal flowing through the ceramic foam filter has a trickle and converges into the mainstream of laminar flow. The laminar flow state of molten metal fills smoothly, avoiding the secondary oxidation and […]