Tag Archives: Ceramic Foam Filter Suppliers

Cake filtration is the most common mechanism in which the foam ceramic foundry filters acts as a sieve and retains particles larger than its pore size on the surface of the filter. These retained particles then form a screen and capture particles smaller than the filter aperture. As the cake accumulates on the surface of […]

Foam ceramic filter board has advantages: high dimensional accuracy, high mechanical strength, stable chemical composition, corrosion resistance to liquid aluminum and its alloys, no phosphorus and environmental friendliness, purifying aluminum liquid, improving aluminum quality, reducing defects, reducing defective rate, reducing cost, increasing production efficiency, and using simple and flexible size from 40mm to 600mm to […]

Metal foam filter manufacturing process uses the web polyurethane foam as the carrier, makes the foam plastics evenly soaked to infiltrate the ceramic slurry, and then repeatedly squeezes the foam plastics to remove the excess slurry, so that the ceramic particles are fully removed. Evenly attached to the top of the foam plastic. Finally, it […]

The aluminum oxide foam ceramic filter plate can effectively remove inclusions from micron-sized fines in aluminum water and make aluminum water into stable laminar flow, which is good for punching. It has a unique mullite corundum structure, good mechanical strength, and chemical stability, superior aluminum water scouring performance, and strict control of pore size and […]

CFF for Molten Aluminum is the most effective and reliable means to remove non-metallic inclusions in the aluminum melt, and is the most effective filtering method. The deep bed filter is large in size, it takes time and effort to install and replace the filter medium, and it is only suitable for the production of […]

Foam ceramic is a kind of porous material. Foam Filter Material for Aluminum Foundry is a third-generation porous ceramic product, developed after the first-generation common porous ceramics and the second-generation honeycomb porous ceramics. Its pore size ranges from nanometer to micrometer, and it has three-dimensional network structure and high porosity material characteristics, and the porosity […]

The ceramic foam casting filter can melt molten metal into a smooth, uniform, and clean liquid after the honeycomb holes. The unique honeycomb structure can adsorb some small particles on the surface. Remove impurities that cause surface problems, low strength, and hardness. Such as some non-metallic particles, slag, refractory fragments, etc., the stable metal laminar […]

Porous Ceramic Filter for Foundry is intended in particular for filtering aluminum alloys and other nonferrous metals for foundry and metallurgical applications at the temperatures up to 1350 °C. Porous Ceramic Filter for Foundry can be used for single metal filtering in the gating system of the mold, but they are intended even for permanent […]

40 PPI Cff manufacturer: Defect analysis and solutions for casting aluminum alloy ingots In the production process of cast aluminum alloy ingots, if improper control occurs, various product defects often occur, especially aluminum-silicon alloys such as ADC12 and A356. 40 PPI CFF Manufacturer gas and non-metallic inclusions in the ingot Non-metallic inclusions (slag inclusions) The […]

Aluminum has been widely used in industrial applications, such as transportation, packaging, automotive, aerospace, electronics. Inclusion content has long been the main quality standard for many products. As the critical application of inclusions increases, such as products with low final thickness and high surface quality, its importance continues to increase. With the further improvement of […]