AdTech ceramic foam filters are specially used to filter impurities in molten aluminum. It can effectively remove large inclusions in molten aluminum and adsorb micron-sized particles of inclusions, which can improve surface quality, product performance, and microstructure, thereby increasing the yield. Ceramic foam filter is widely used in the production fields of aluminum profile, aluminum […]
Using a 20 PPI ceramic foam filter to filter and purify A356 alloy, by observing the changes in the tensile properties and elongation of the alloy before and after purification, the following conclusions can be drawn: The filtration and purification of the 20ppi ceramic foam filter can improve the tensile strength and elongation of A356 […]
After using the ceramic foam filter for metal casting, the rectifying effect of the ceramic foam filter can be fully demonstrated. The molten metal flowing through the ceramic foam filter has a trickle and converges into the mainstream of laminar flow. The laminar flow state of molten metal fills smoothly, avoiding the secondary oxidation and […]
Ceramic foam filter of aluminum is used to remove the oxide inclusions and provide high-quality molten aluminum for the casting process. Before the ceramic foam filter (CFF) filters the molten aluminum, it is necessary to fully preheat the ceramic sheet and the filter box to ensure that the molten aluminum can pass through the filter […]
Ceramic Foam Filtration is widely used for molten aluminum filtering. Molten aluminum filtering is an important step in the aluminum casting process. After the aluminum melt is refined in the smelting furnace, refining in the static furnace and online refining, the gas content has been greatly reduced, and it is basically in the critical minimum […]
Ceramic foam can be divided into two categories, namely, open hole (net) ceramic material and closed-cell ceramic material, depending on whether each hole has a solid wall. If the foam solid is only included in the hole, it is called an open hole ceramic material whose pores are interconnected. If there is a wall surface, […]
Molten metal filter filtration adopts a unique ceramic filter, forming a high average surface area network, irregular, three-dimensional, open hole structure. These ceramic foam filters are widely used in casting aluminum alloy, stainless steel, super alloy, cobalt and copper alloy, zinc and zinc alloy, iron and steel. Molten Metal Filter Filtration Benefit By reducing the […]
Metal foam filter manufacturing process uses the web polyurethane foam as the carrier, makes the foam plastics evenly soaked to infiltrate the ceramic slurry, and then repeatedly squeezes the foam plastics to remove the excess slurry, so that the ceramic particles are fully removed. Evenly attached to the top of the foam plastic. Finally, it […]
The foam ceramic filtration mechanism is generally described as diffusion interception and inertial collision interception or screening, sedimentation and deep bed filtration. The State Key Laboratory of Tsinghua University established a three-dimensional physical model and a two-phase flow model for the filtration mechanism of foam ceramics, and carried out simulation calculations, which is very helpful […]
The ceramic filter plate is an energy-saving and environmentally friendly product, which is widely used in the dehydration process of metal ore operations such as iron, gold, silver and copper. It plays a vital role in energy-saving and emission reduction. For use in most cases, the dry material is generally left for the ceramic filter […]
