The caster tip for continuous casting is generally made of a low-density ceramic material that can withstand the wear and thermal shock associated with liquid aluminum contact, such as a ceramic fiber board formed into the necessary shape. Because of the low density of these materials, they have a low thermal conductivity and can provide […]
By combining a pair of slender feed nozzle components with a non-corrosive cushion, a molten metal feed nozzle for a continuous roll casting machine is made. The feed nozzle members are spaced a sufficient distance apart to allow molten metal to pass through the downstream edge to engage the surface of the continuous casting roll. […]
Feed caster nozzle often explodes due to the accumulation of gas in the nozzle cavity during casting and rolling. By drilling holes on the surface of the caster nozzles and using far-infrared nozzle baking technology, the possibility of gas accumulation in the nozzle chamber of hard materials can be greatly reduced. The feed caster nozzle […]
Install the molten aluminum castertip on the steel structure fixture, fix it with screws, then install the feed pipe and the front box, and check whether the joints are tightly connected to prevent leakage when the vertical plate is discharged. Put the assembled pouring system into the drying box, dry, and preheat. The furnace temperature […]
Continuous casting and rolling production of slabs is the key to producing high-quality aluminum slabs. The quality of the vertical slabs directly affects the internal structure and surface quality of the aluminum slabs. In the process of erecting the slab, often after the slag ran away or the slab was discharged for a period of […]
