Tag Archives: Foam Filter Manufacturers

Foam ceramic filter board has advantages: high dimensional accuracy, high mechanical strength, stable chemical composition, corrosion resistance to liquid aluminum and its alloys, no phosphorus and environmental friendliness, purifying aluminum liquid, improving aluminum quality, reducing defects, reducing defective rate, reducing cost, increasing production efficiency, and using simple and flexible size from 40mm to 600mm to […]

Metal foam filter manufacturing process uses the web polyurethane foam as the carrier, makes the foam plastics evenly soaked to infiltrate the ceramic slurry, and then repeatedly squeezes the foam plastics to remove the excess slurry, so that the ceramic particles are fully removed. Evenly attached to the top of the foam plastic. Finally, it […]

The aluminum oxide foam ceramic filter plate can effectively remove inclusions from micron-sized fines in aluminum water and make aluminum water into stable laminar flow, which is good for punching. It has a unique mullite corundum structure, good mechanical strength, and chemical stability, superior aluminum water scouring performance, and strict control of pore size and […]

CFF for Molten Aluminum is the most effective and reliable means to remove non-metallic inclusions in the aluminum melt, and is the most effective filtering method. The deep bed filter is large in size, it takes time and effort to install and replace the filter medium, and it is only suitable for the production of […]

Foam ceramic is a kind of porous material. Foam Filter Material for Aluminum Foundry is a third-generation porous ceramic product, developed after the first-generation common porous ceramics and the second-generation honeycomb porous ceramics. Its pore size ranges from nanometer to micrometer, and it has three-dimensional network structure and high porosity material characteristics, and the porosity […]

The ceramic foam casting filter can melt molten metal into a smooth, uniform, and clean liquid after the honeycomb holes. The unique honeycomb structure can adsorb some small particles on the surface. Remove impurities that cause surface problems, low strength, and hardness. Such as some non-metallic particles, slag, refractory fragments, etc., the stable metal laminar […]

Porous Ceramic Filter for Foundry is intended in particular for filtering aluminum alloys and other nonferrous metals for foundry and metallurgical applications at the temperatures up to 1350 °C. Porous Ceramic Filter for Foundry can be used for single metal filtering in the gating system of the mold, but they are intended even for permanent […]

Aluminum has been widely used in industrial applications, such as transportation, packaging, automotive, aerospace, electronics. Inclusion content has long been the main quality standard for many products. As the critical application of inclusions increases, such as products with low final thickness and high surface quality, its importance continues to increase. With the further improvement of […]

With the development of the metallurgical industry, aluminum foundries pay more and more attention to the purity of aluminum. The CFF filtering method is currently the most widely used and most economical filtering method in the world. So do you know the Ceramic Foam Filtration Mechanism, let’s understand it together. CFF Filtration Mechanism Through screening, […]

The ceramic filters for foundry use filtration technology to reduce impurities and inclusions in the molten aluminum before casting. The quality of the liquid aluminum treatment will affect the product quality of the ingot, which in turn affects the product quality of the subsequent processed materials. Therefore, the ceramic filter for foundry technology is an […]