Tag Archives: Trough 

The aluminum silicate launder for casting is used to transport molten aluminum, can reduce secondary pollution of the molten metal. AdTech is a comprehensive manufacturer of washing equipment, specializing in the development of new materials and the production of high-performance insulating seals. Since 2012, our company has begun to develop overall molten aluminum launder system, […]

The most advanced technology for transporting molten metal from the furnace to the support and die casting machine is in the heated launder system. The casting launder minimizes turbulence and oxides in the molten metal. Molten metal launder system has a covering layer to prevent dangerous and expensive leaks, and is gently heated to maintain […]

Ceramic launder system is an important step in aluminum casting. The transfer method of molten aluminum in the production of aluminum alloy smelting is also a factor affecting the melt quality. Under industrial production conditions, the following test results have been obtained: (1) Transfer the ladle into the injection. Firstly, the molten aluminum alloy melted […]

The most technically advanced way to deliver molten aluminum from melting furnaces to holders and die casting machines is in a heated launder system. A launder minimizes turbulence and oxides in the molten metal. And, because the metal flows in a quiet stream to the holding furnace, it eliminates transfer labor and monorails, fork trucks, […]

Launder Segments For Aluminium Casting will be connecting the customer’s existing gas fired aluminum melting furnace to three new electric resistance aluminum holding furnaces located at their three diecast machines. The launder eliminates equipment and manpower costs, as well as the inherent dangers, associated with transferring molten aluminum from the melting furnace to the three […]

Refractory Launder Runner is mainly used for the distribution of aluminum liquids with high insulation requirements, such as the active flow cell on the casting and rolling, and the distribution flow cell on the same level casting plate. Aluminum Fiber Ceramics uses a non-stick aluminum castable. It is a new type of composite refractory castable. […]

In the aluminum processing industry, it needs equipment to re-injected liquid metal from smelting furnaces to holding furnaces. So that the liquid metal can flow between the equipment according to the process steps. The current general practice is to arrange a flow channel between the devices, the flow channel is connected to the aluminum liquid […]