The caster tip for continuous casting is generally made of a low-density ceramic material that can withstand the wear and thermal shock associated with liquid aluminum contact, such as a ceramic fiber board formed into the necessary shape. Because of the low density of these materials, they have a low thermal conductivity and can provide […]
By combining a pair of slender feed nozzle components with a non-corrosive cushion, a molten metal feed nozzle for a continuous roll casting machine is made. The feed nozzle members are spaced a sufficient distance apart to allow molten metal to pass through the downstream edge to engage the surface of the continuous casting roll. […]
Feed caster nozzle often explodes due to the accumulation of gas in the nozzle cavity during casting and rolling. By drilling holes on the surface of the caster nozzles and using far-infrared nozzle baking technology, the possibility of gas accumulation in the nozzle chamber of hard materials can be greatly reduced. The feed caster nozzle […]
Caster nozzle is the key component of aluminum strip continuous casting and rolling mill, its quality directly affects the quality and output of aluminum strip. Special treatment of caster nozzle material can effectively prevent molten aluminum from corroding the casting nozzle and avoid carbonization. Fracture tissue is a fine and uniform layered fiber structure, which can […]
Continuous casting and rolling production of slabs is the key to producing high-quality aluminum slabs. The quality of the vertical slabs directly affects the internal structure and surface quality of the aluminum slabs. In the process of erecting the slab, often after the slag ran away or the slab was discharged for a period of […]
Due to the uneven contact surface between the casting nozzle and the upper and lower rolls during installation, the casting nozzle partially contacts the roll surface tightly, resulting in strong friction, obvious traces on the roll surface, and white stripes on the plate surface. Therefore, when installing the casting nozzle, you must pay attention to […]
Aluminum Ceramic Fiber Nozzle Cavity improves the uniformity of the melt distribution in the nozzle device by the split block inside the nozzle device, and improves the quality of the cast and rolled products. This aluminum plate casting device includes: two upper and lower plates oppositely arranged, an edge baffle connecting the two upper and […]
Although there are long research and trials for producing the wire or rod of commercial the high-strength aluminum alloy, there are few companies with the success in producing commercial hard-aluminum alloys wire and rod by Continuous Casting and Rolling process. In the continuous casting process, molten metal is fed through the Refractory Ceramic Fiber Castertip, […]
In mid-November 2018, AdTech company paid a friendly business visit to Turkey. President Xiong and sales manager Dong successively visited about 15 customers, and were very rewarding. On the 19th, they visited a large local aluminum plant in Turkey, and were warmly welcomed by the other party. The relevant person in charge of the Turkish […]
Aluminum silicate castertip is a key component of the aluminum strip casting machine. AdTech aluminum silicate casting nozzle adopts ceramic fiber and other various materials. It has the advantages of good elasticity, no deformation, and long use time. The working principle is to make the liquid metal flow out of the mouth evenly. So that […]
