Tag Archives: Foundry Ceramic Filters

The Zirconia Ceramic Foam Filter can make the molten metal fill the cavity more evenly. The molten metal has a higher tendency to turbulence during pouring. The turbulent flow through the three-dimensional pore structure of the zirconia foam ceramic filter is finally converted into a very stable layer flow. Laminar flow has a better filling […]

Porous Ceramic Filter for Foundry is intended in particular for filtering aluminum alloys and other nonferrous metals for foundry and metallurgical applications at the temperatures up to 1350 °C. Porous Ceramic Filter for Foundry can be used for single metal filtering in the gating system of the mold, but they are intended even for permanent […]

Aluminum has been widely used in industrial applications, such as transportation, packaging, automotive, aerospace, electronics. Inclusion content has long been the main quality standard for many products. As the critical application of inclusions increases, such as products with low final thickness and high surface quality, its importance continues to increase. With the further improvement of […]

In addition to considering the actual production quality requirements for aluminum products, the selection of aluminum metal foam filter must also consider the aluminum flow rate of the flume during casting and rolling, the total amount of filtration, the cleanliness of the aluminum liquid itself, and the production cost. Choosing Foundry Ceramic Filters with too […]

When these inclusions appear in the final cast product after the molten aluminum is solidified, they cause the final aluminum product to be less ductile or to have poor finishing characteristics. Therefore, it is important to remove entrained solids from the molten aluminum before it is cast into a solid body. In general, the ceramic […]

The ceramic filters for foundry use filtration technology to reduce impurities and inclusions in the molten aluminum before casting. The quality of the liquid aluminum treatment will affect the product quality of the ingot, which in turn affects the product quality of the subsequent processed materials. Therefore, the ceramic filter for foundry technology is an […]

The ceramic foam filter for casting can effectively remove large inclusions in the liquid aluminum, and absorb micron-sized fine inclusion particles. It plays a role in improving surface quality, product performance, microstructure, and yield. Molten aluminum filters are widely used in aluminum profiles, aluminum foil, aluminum alloy and other production fields. The foam filter uses […]

Inclusions and gases in the metal have a significant impact on the strength, fatigue resistance, corrosion resistance, stress corrosion cracking performance. Effectively controlling the oxidized inclusions in the melt can improve the quality of cast rods and rolled plates, it has become a common goal pursued by metallurgy, foundry and materials industry in various countries. […]

The application of metal is wide in human life, covering almost all fields. With the enhancement of environmental awareness and healthy living standards, people have higher requirements for the performance of castings. High-quality metal products are also widely recognized for their excellence. At the same time, the continuous development of science and technology has also […]

The filtration efficiency of the porous alumina plate is closely related to its correct installation and use. At the same time, it is also necessary to prevent the phenomenon of recontamination of the clean aluminum liquid after filtration. How to Install Porous Alumina Plate Need to pay attention to the following points: 1. Correct selection […]