Tag Archives: Honeycomb Ceramic Filter

The quality of aluminum melt is very important, and it greatly affects the subsequent processing performance and the quality of the final product. Therefore, all countries in the world wish the purification of aluminum melt very seriously. Ceramic foam filtering technology has been used to remove inclusions in molten aluminum for more than 30 years. […]

Foam ceramic filter is the last technology for molten aluminum filtration. It is particularly important to choose the foam ceramic filter board. According to the environment of each foundry, choose the best ceramic foam filter and obtain high cleanliness of molten aluminum. The choice of foam ceramic filter plate depends on the impurity content in […]

AdTech ceramic foam filters are specially used to filter impurities in molten aluminum. It can effectively remove large inclusions in molten aluminum and adsorb micron-sized particles of inclusions, which can improve surface quality, product performance, and microstructure, thereby increasing the yield. Ceramic foam filter is widely used in the production fields of aluminum profile, aluminum […]

Ceramic foam filter of aluminum is used to remove the oxide inclusions and provide high-quality molten aluminum for the casting process. Before the ceramic foam filter (CFF) filters the molten aluminum, it is necessary to fully preheat the ceramic sheet and the filter box to ensure that the molten aluminum can pass through the filter […]

Ceramic foam filter for molten metal filtration is used as a means of separating finely divided solid impurities suspended in the melt. For this purpose, it is recommended to use a refractory bed, compacted loose filter material block or screen. It has also been proposed that ceramic foam filter can be used as a filter […]

Ceramic foam can be divided into two categories, namely, open hole (net) ceramic material and closed-cell ceramic material, depending on whether each hole has a solid wall. If the foam solid is only included in the hole, it is called an open hole ceramic material whose pores are interconnected. If there is a wall surface, […]

Porous Ceramic Filter Filtration can remove alumina and other nonmetallic compounds, such as lithium oxide from the molten aluminum lithium alloy. The porous ceramic filter may be a cellular structure or a foam with interconnect pores. As everyone knows, in order to remove alumina from molten aluminum or aluminum alloy, aluminum or aluminum alloy is […]

Cake filtration is the most common mechanism in which the foam ceramic foundry filters acts as a sieve and retains particles larger than its pore size on the surface of the filter. These retained particles then form a screen and capture particles smaller than the filter aperture. As the cake accumulates on the surface of […]

Ceramic filter filtration is becoming more and more common because people have higher and higher requirements for the quality of aluminum products. The ceramic filter for casting can not only effectively remove a large number of oxide inclusions in molten aluminum, but also filter out a few microns of small inclusions which can not be […]

30 PPI foam filter is suitable for aluminum alloy castings. The choice of ceramic foam filter is very important for a good filtration effect and no pollution to the alloy. Many practices show that the use of ceramic foam filters can remove inclusions, improve the structure of castings, improve the mechanical properties and qualified rate […]