Blog

Porosity is the percentage of the total volume of cavities in the ceramic foam filter plate product relative to the total volume of the filter plate product. Porosity determines the filtration capacity of the ceramic foam filter plate per unit volume. The greater the porosity, the greater the filtration rate of the filter plate and […]

The ability to degas molten aluminum is generally achieved by using an inert gas, typically introduced into the melt by a rotary degassing unit. This degassing process is limited by thermodynamic laws; when purge gas bubbles are introduced into the melt, they collect hydrogen as they float to the surface. The best possible situation is […]

Литейный пенокерамический фильтр эффективно удаляет с металла вредные примеси, такие как включения и газы, и улучшать внутреннее качество металла. Алюминиевые литейные заводы используют пенокерамические фильтры для получения алюминиевых слитков с удовлетворительными результатами. Кроме того, предварительные результаты дает применение пенокерамических фильтров для прецизионного литья, алюминиевой фольги и алюминиевых стержней. После использования литейного пенокерамического фильтра сопротивление потоку […]

The main advantage of the ceramic filter for Greek Aluminium is to effectively eradicate the slag inclusions through the filter plate, and remove the micron-sized fine inclusions in the aluminum liquid. At the same time, because the ceramic filter plate filters out fine inclusions and reduces the effective number of crystal nuclei in the molten […]

The smelting of aluminum alloys has the characteristics of high heat consumption, easy oxidation, easy absorption of hydrogen, and easy absorption of impurity metals. (1) Consume a lot of calories. Although aluminum has a low melting point, it has a large latent heat of fusion, a large specific heat, a small blackness, and a strong […]

In the production of aluminum alloy products, whether high-quality products can ultimately be produced depends mainly on the smelting and casting links. In the melting and casting process, hydrogen removal and impurity removal are the most important. For production lines that use scrap aluminum as raw materials to produce aluminum and aluminum alloys, online refining […]

In the aluminum coil rolled products industry, the continuous casting and rolling process have been widely used in the production of coils. In the world’s total output of aluminum plates, strips, and foils, hot-rolled billets are less than 20%, and lower-cost twin-roll continuous casting billets are more than 80%. Improving the quality of double-roll continuous […]

Cold-rolled aluminum coil process usually refers to the processing of cast-rolled material. As for the aluminum coil casting and rolling process, relatively speaking, it may be much simpler. Aluminum ingot—aluminum liquid—furnace—cast-rolled coil, which is a conventional processing technology for raw cast-rolled materials. The hot rolled aluminum coil process is that its raw material is directly […]

Industrial Casting and Rolling Production Process: The molten metal in the stationary furnace is degassed and slag removed by the online degassing system. After the filtering system is filtered, the molten aluminum is stably fed into the casting nozzle through the liquid level control system. It is transported from the casting nozzle to the roll […]

The Flux for Volta Aluminium Melting is mainly used to remove impurities. The essence of impurity removal is to use the difference in physical or chemical properties between the inclusion and the aluminum melt, so as to achieve the separation of the two, and achieve the purpose of impurity removal and hydrogen removal. The Flux […]