Blog

Ceramic Foam Filters Production Process, also known as the organic foam impregnation method, is a relatively mature production process. Sizing process The selection of the formula must ensure the best condition of the consistency and fluidity of the slurry, so as to ensure that the product can be uniformly sized during the sizing process and […]

Metal degassing process and slag removal process are important molten metal processing processes for cleaning molten metal and improving product quality. The commonly known metal degassing process blows flux into molten metal along with an inert gas such as nitrogen or argon. Hydrogen is removed from the melt by desorption into the bubbles, while other […]

Molten metal filtration with ceramic filter can be performed at any stage after the aluminum raw material is melted and refined in the furnace and before the molten Al is supplied to the mold for casting. Molten metal filtration with ceramic foam filter improves inclusion removal and filter life. In other words, the filter can […]

Flux for Casting Aluminum is suitable for coating, slag removal and slag removal in aluminum smelter and foundry. They reduce oxide formation and furnace wall slag, help remove non-metallic inclusion in liquid aluminum, reduce the aluminum content in scum, help remove scum. Flux for Casting Aluminum has particle and powder two forms. Compared with powder […]

Casthouse Filter is the most effective way to remove inclusions from aluminium melts. Ceramic foam filters have a multi-layer network, multi-dimensional through-holes, and the pores are interconnected. When the molten metal is filtered, the molten aluminum carries the inclusions along the tortuous channels and pores, contacts with the foamed skeleton of the CFF filter plate, […]

Launder for metal transfer is suitable for aluminum melting furnace, purifying furnace, casting table, the transportation of molten aluminium between furnace degassing and filtration. Our refractory technology allows manufacturers to eliminate the flow slots in aluminum furnaces, avoid the need to “superheat” the metal in in-line equipment, and most importantly, lower the holding furnace temperature. […]

Aluminium Degassing Device is based on the movement of dissolved hydrogen from a high concentration region (in the melt) to a low concentration region (in the inert gas). Hydrogen is dispersed in the molten metal, just as it would be released in any confined space. It will maintain a constant concentration throughout the melt. Hydrogen […]

Molten Metal Filtration Australia is a new type of industrial ceramic product with low bulk density (0.25-0.65) g/cm3, high porosity (60-90%), and three-dimensional network framework. Ceramic foam filter has the characteristics of high temperature resistance, chemical corrosion resistance, interpenetration, large specific surface area and so on. Ceramic foam filter is widely used in metal melt […]

Foam ceramic filter Canada with polyurethane foam as the carrier, filled by refractory aggregate sintering additives, adhesives and other fine powder and water made of ceramic slurry, and then the slurry is extruded ceramic material around foam fibers. Polyurethane after drying, burning, high temperature sintering, heat decomposition, leaving foam ceramic products, namely foam ceramic filter. […]

Danish ceramic foam filter is currently the most effective tool for removing oxidized inclusions from aluminum melt. Melt purification technology of aluminum alloy is the most effective method to improve the quality of casting rod, and it is also the common goal of aluminum industry casting. Use and Selection of Danish Ceramic Foam Filter The […]