Ceramic Foam Filter Bahrain Aluminium, Molten Metal Filtration

Ceramic Foam Filter Bahrain Aluminium has the advantages of a uniform three-dimensional grid, large porosity, good filtering effect, and low price.

The size of Ceramic Foam Filter Bahrain Aluminium is determined according to the impurity content in the aluminum melt, the melt transfer flow rate, and the quality requirements of the final casting.

Ceramic Foam Filter Bahrain Aluminium

The impurity content is high, and the casting quality is average. You can choose a ceramic foam filter with a larger mesh, and add a glass fiber cloth coarse filter in front of the ceramic foam filter. At this time, it is important to use glass fiber cloth for coarse filtration in semi-continuous casting to prevent clogging of the filter plate.

The quality requirements of casting products are high. The new type of ceramic foam filter with small meshes is selected to achieve the ideal cleanliness and achieve good results.

According to the melt flow rate and total throughput, select the filter plate specifications. The flow rate is large, the total throughput is large, the filter plate hole is small, and the larger size is selected.

When buying a CFF filter for molten aluminum filtration, you should carefully evaluate the effective specific surface area or porosity calculation of the foam. You can observe the homogeneity state of the mesh surface of the filter plate, and then observe the homogeneity state of the mesh of the cross-section. If possible, the porosity can be calculated by the drainage method.

Founded in 1971, Bahrain Aluminum has an initial smelting capacity of 120,000 tons and has a portfolio of value-added products, including cast and remelted products, rolled products, extruded products and alloy products.

In 2020, the aluminum output of Bahrain Aluminum Corporation (Alba) exceeded 1.5485 million tons, exceeding the annual production target of 1.54 million tons, setting a record for commercial operations in 50 years, a year-on-year increase of 13%. In 2019, Alba aluminum production increased by 35% year-on-year to 1.365 million tons.

Alba Aluminum Company is the world’s largest single aluminum smelter outside of China. Thanks to the full commissioning of the company’s sixth production line, Alba aluminum production increased significantly in 2019; the output target for 2020 is 1.54 million tons.

Leave a Reply