Therefore, it can be inferred that both SCUT-type and B-type the aluminium casting flux have a better-degassing effect, the degassing ability is comparable, and is better than A-type refining flux. It can be seen from Figure 9 that the number of pinholes on the cross-section of the pinhole sample before refining is large. After the […]
Granular Fluxes can reduce emissions by up to 85% without significantly reducing performance, as they allow less flux to be used and make it work in a different way. It has been found that the form of flux has a very important influence on the type and quantity of emissions. In an increasingly environmentally conscious […]
Aluminum is a very active metal, which easily reacts with water vapor during the smelting process to generate hydrogen and oxide inclusions (Al2O3). These non-metallic inclusions are very harmful to the performance of aluminum products. Therefore, the purification of aluminum melt is one of the main ways to improve the quality of aluminum products. The […]
According to the actual production situation of cast rolling, the dissolved hydrogen is the most easily dissolved gas in molten aluminum, and its content accounts for 90% of the dissolved gas. Hydrogen is an important cause of porosity, loose strip and peeling in casting and rolling and the next process (aluminum alloy is easy to […]
The high-efficiency aluminum melting refining agent is mainly used to remove the hydrogen and floating oxidized slag in the aluminum liquid, so that the aluminum liquid is more pure, and the metal solvent also has the effect of removing slag. The principle is that some members of the molten aluminum refining agent are easy to […]
Aluminum cast flux is used in various aluminum alloy melts, and can be used in pure aluminum smelting, refining and slagging. In use, only the refining agent is sprinkled on the surface, then quickly dissolved in the liquid aluminum, and then fully stirred. If an ejector is used, it is better to inject the refining […]
The aluminium refining flux is white powder and granular. It is mixed according to a certain proportion after the drying of various inorganic salts. It plays an important role in the process of smelting aluminium. What is the role of the specific aluminium refining agent? Aluminium refining flux is mainly used to remove the hydrogen […]
Furnace cleaning flux is used to clean the hard slagging of the furnace, furnace wall, and bottom after aluminum and aluminum alloy smelting. The accumulation on the inner wall of the refractory material of the reverberatory furnace not only reduces the life of the refractory material, but also reduces the volume of the furnace, which […]
Aluminum melt flux cleaning process can be combined with rotary gas purging. In this process, the best degassing, oxide removal and slag reception with low aluminum content are ensured. In the absence of aluminum melt flux, this rotary treatment is less effective for the removal of oxides and results in the formation of slag with […]
Slag remover belongs to a processing flux for purifying aluminum alloy melt. It is composed of a variety of chlorides and fluorides. It has not only a remarkable slag removal effect, but also degassing and covering functions. Slag removal and degassing are the two central links and ultimate goals of aluminum alloy melt purification treatment, […]
- 1
- 2
