Granular Fluxes can reduce emissions by up to 85% without significantly reducing performance, as they allow less flux to be used and make it work in a different way. It has been found that the form of flux has a very important influence on the type and quantity of emissions. In an increasingly environmentally conscious […]
The high-efficiency aluminum melting refining agent is mainly used to remove the hydrogen and floating oxidized slag in the aluminum liquid, so that the aluminum liquid is more pure, and the metal solvent also has the effect of removing slag. The principle is that some members of the molten aluminum refining agent are easy to […]
Aluminum cast flux is used in various aluminum alloy melts, and can be used in pure aluminum smelting, refining and slagging. In use, only the refining agent is sprinkled on the surface, then quickly dissolved in the liquid aluminum, and then fully stirred. If an ejector is used, it is better to inject the refining […]
The aluminium refining flux is white powder and granular. It is mixed according to a certain proportion after the drying of various inorganic salts. It plays an important role in the process of smelting aluminium. What is the role of the specific aluminium refining agent? Aluminium refining flux is mainly used to remove the hydrogen […]
Furnace cleaning flux is used to clean the hard slagging of the furnace, furnace wall, and bottom after aluminum and aluminum alloy smelting. The accumulation on the inner wall of the refractory material of the reverberatory furnace not only reduces the life of the refractory material, but also reduces the volume of the furnace, which […]
Aluminum melt flux cleaning process can be combined with rotary gas purging. In this process, the best degassing, oxide removal and slag reception with low aluminum content are ensured. In the absence of aluminum melt flux, this rotary treatment is less effective for the removal of oxides and results in the formation of slag with […]
Multi-function refining flux is an important auxiliary material in aluminum alloy smelting. At present, the main components of flux on the market are chloride and fluoride. Among them, chloride has a strong water absorption and is easily affected by moisture. Therefore, the raw materials used for flux production must be dried, water must be completely […]
Aluminum Refining Flux should be added in proportion. The aluminum refining agent is generally 0.3% of aluminum alloy. Method Use a seamless steel pipe inserted 20cm from the bottom of the molten aluminum, and spray the refining agent with nitrogen or argon. After the refining spray, the nitrogen or argon is blown for another 15-20 […]
The surface of the aluminum material has an uneven thickness of the oxide film, sometimes also absorbs water, is mixed with sand, sticky with oil stains, and painted with paint. When melting, the aluminum material is further oxidized in a high-temperature environment, the thickness of the oxide film increases, and it reacts with moisture to […]
Aluminum alloy smelting is one of the most important process links for the production of high-quality casting rods. Flux refining process for aluminum is an important process in aluminum alloy smelting. The main components of fluxes currently on the market are chlorides and fluorides. If the process is not properly controlled, slag, pores, coarse grains, […]
- 1
- 2
