Ceramic filters mainly include foam ceramic filter, bonded ceramic particle filter, and rigid ceramic filter. Ceramic foam filter is widely used in general aluminum castings. Ceramic foam filter has high porosity and a large adsorption area. They have a good filtering effect on inclusions larger than 10 μm (for example, the efficiency of removing 40 […]
Foundry Filter for Molten Aluminum plays a very important role in improving the quality of castings. It can effectively filter liquid-solid non-metallic inclusions in molten metal once or twice, thereby reducing slag holes, improving the mechanical properties of castings, reducing machining allowances, improving surface finish, and prolonging the service life of castings. If the molten […]
Ceramic Foam Filter For Metal Filtration is specially developed by AdTech for purifying molten aluminum. The molten aluminum flows through the tortuous and porous three-dimensional foam structure, and the tiny impurities are trapped, adsorbed, deposited, and firmly adhered to the pore walls, filtering out the micron-level impurities in the molten aluminum, and solving the aluminum […]
Ceramic foam materials are very useful in filtering molten metal, especially molten aluminum. It is used to remove or reduce entrained solids from the final cast product, especially when the resulting metal is used in decorative products, such as decorative veneers or plates made of aluminum alloy. Adtech alumina ceramic foam filter has a high-temperature […]
The purification of molten metal plays an important role in improving the mechanical properties of castings. At present, the filtering device used to purify molten metal is mainly ceramic foam filter used for aluminium castings, which can effectively intercept harmful impurities in molten metal, convert molten metal from turbulent flow to laminar flow, and completely […]
Ceramic foam filter is a very good product, which is widely used in molten aluminum filtration in aluminum smelting and casting process to prevent particulate impurities in molten aluminum from entering the casting billet and affecting the quality of aluminum processed products. According to the quality requirements of the castings, the flow rate of the […]
Regardless of the filter used, care must be taken to ensure that the filter is not affected by excessive vibration or changes in the metal level. These interferences will cause the release of inclusions, which may eventually lead to inclusions in the finished product. Good process control downstream of the final aluminum alloy filtration equipment […]
Foam ceramic filter is the last technology for molten aluminum filtration. It is particularly important to choose the foam ceramic filter board. According to the environment of each foundry, choose the best ceramic foam filter and obtain high cleanliness of molten aluminum. The choice of foam ceramic filter plate depends on the impurity content in […]
AdTech ceramic foam filters are specially used to filter impurities in molten aluminum. It can effectively remove large inclusions in molten aluminum and adsorb micron-sized particles of inclusions, which can improve surface quality, product performance, and microstructure, thereby increasing the yield. Ceramic foam filter is widely used in the production fields of aluminum profile, aluminum […]
Ceramic foam filter of aluminum is used to remove the oxide inclusions and provide high-quality molten aluminum for the casting process. Before the ceramic foam filter (CFF) filters the molten aluminum, it is necessary to fully preheat the ceramic sheet and the filter box to ensure that the molten aluminum can pass through the filter […]
- 1
- 2
