SEO

Aluminum liquid purification equipment is a degassing and purification treatment equipment, it clean metal by removing physical (hydrogen gas inclusions), chemicals (alkali metals) & metallurgical (alkali salts & sludge inter-metallic) impurities. The molten aluminum purification system operation is based on the proven principle of high-energy diffusion and chemically driven mass transfer. AdTech purification equipment for […]

Molten Metal Filter has the advantages of good chemical stability, high specific strength, high-temperature resistance, thermal shock resistance, large specific surface area, etc., and good slag removal effect, easy operation, easy to match with other parts, and low cost. Therefore, it has become a conventional purification method in the production of aluminum alloys. Studies have […]

40 PPI Cff manufacturer: Defect analysis and solutions for casting aluminum alloy ingots In the production process of cast aluminum alloy ingots, if improper control occurs, various product defects often occur, especially aluminum-silicon alloys such as ADC12 and A356. 40 PPI CFF Manufacturer gas and non-metallic inclusions in the ingot Non-metallic inclusions (slag inclusions) The […]

Aluminium Granulated Flux reacts peacefully in aluminum water, does not burn violently and generate a lot of smoke, and has a low moisture content, which can create a good working environment. The product is granular (0.82-3.15mm) and has a larger contact area with the aluminum liquid than the bulk refining agent. The effect of degassing […]

Alu Granulated Flux is used for slag removal of aluminum and aluminum alloys. Its main components are sodium chloride, potassium chloride and magnesium chloride. Chloride components account for more than 80%. With optical density, it can be well dispersed on the surface of aluminum melt, but the flux containing chlorine salt only has limited ability […]

Aluminum has been widely used in industrial applications, such as transportation, packaging, automotive, aerospace, electronics. Inclusion content has long been the main quality standard for many products. As the critical application of inclusions increases, such as products with low final thickness and high surface quality, its importance continues to increase. With the further improvement of […]

The aluminium casting flux used in production actually has three functions of adsorption, dissolution, and combination of slag-making. The slag-removing effect is dependent on refining temperature, time, and flux properties. Refining Temperature When the aluminum drossing flux is constant, the main factor slag-removing affecting is temperature. Increasing the refining temperature is also beneficial for adsorption […]

In addition to considering the actual production quality requirements for aluminum products, the selection of aluminum metal foam filter must also consider the aluminum flow rate of the flume during casting and rolling, the total amount of filtration, the cleanliness of the aluminum liquid itself, and the production cost. Choosing Foundry Ceramic Filters with too […]

The filtering result of the honeycomb ceramic filter depends on the chemical composition of the inclusions in the melt, the shape of the ceramic foam filter plate, the filter plate specifications, the metal flow rate, the wettability of the filter plate surface to aluminum, the size of the inclusions, etc. Honeycomb Ceramic Filter for Molten […]

The Influencing Factors of Hydrogen Dissolution in Aluminum Liquid mainly include Hydrogen Partial Pressure, Temperature, Alloy Element, and Other Factors. Only by mastering the main influencing factors of the aluminum liquid, can we better degas by degassing system. Influencing Factors of Hydrogen Dissolution Hydrogen Partial Pressure At a certain temperature, the solubility of hydrogen increases […]