Uncategorized

Ceramic Foam Filter for Casting is one of the most widely molten metal filters used in KUBAL Aluminum industries. Its function is to make the turbulent and tumbling molten metal become stable, uniform, and clean after passing through the foam ceramic honeycomb holes, thereby greatly reducing non-metallic inclusions, reducing the rate of casting waste, and […]

Ceramic Foam Filter MOZAL Aluminum can effectively block the slag in molten metal. When the molten metal passes through the ceramic foam filter with a complex structure, the filter medium filters out the inclusions larger than the pore size of the filter surface through mechanical separation, and makes them precipitate at the filter. As the […]

Foam ceramic filter has been applied in New Zealand Aluminum production, bringing a qualitative leap in the filtration of molten metal. Foam ceramic is a kind of porous material, which has the characteristics of a three-dimensional network structure and high porosity. Due to the special structure of foam ceramics, it has the advantages of low […]

Ceramic foam filter for Jsc Aluminium adopts a three-dimensional network structure, takes the organic foam sponge bonded on the pores as a carrier, is embedded in a special ceramic slurry with thixotropy, and uses a special roll extrusion process to evenly spread the ceramic slurry On the surface. Carrier frame. The porous polyurethane foam filter […]

Rus Aluminium Filter is a particularly efficient and durable molten aluminum filter for filtering oxide and non-oxide impurities. When filtering molten aluminum, since the temperature of the molten aluminum filter is much lower than the pouring temperature of the molten metal, the original molten metal in contact with the filter must transfer heat to the […]

The foam ceramic filters can remove impurities in the liquid aluminum, which can significantly improve the quality of the ingot and reduce the waste rate. The ceramic foam filter materials have widely used in the metallurgical industry. The solid non-metallic particles suspended in the molten metal can cause serious difficulties in the aluminum casting and […]

AdTech slagging fluxes are white powdery fine particles, the main components are chloride salt and fluoride salt, and other compounds. After proper heating treatment and sieving, the particle size is uniform. It can be carried out with gas in a refining tank. It can also be sprayed directly into the surface of the molten metal […]

The main purpose of aluminum alloy refining fluxes is to agglomerate nonmetallic inclusions and break apart and pile up oxide particles. It begins slowly sink when added into the melt with dissolving and absorbing the oxides and gases. It plays an important role in improving the quality of aluminum and aluminum alloy castings. Our country […]

The filtering effect depends on the ceramic foam filter size for molten aluminum filtration, the size and type of inclusions (density, wetting characteristics), and the speed of metal aluminum liquid passing through the filter plate. Ceramic foam filters are basically divided into pore sizes: 20PPI, 30PPI, 40PPI, 50PPI, and 60PPI. The larger the number, the […]

Granular aluminum flux is a new, efficient, and environmentally friendly additive. It is used in the secondary refining process of aluminum alloy smelting and aluminum alloy casting. Its main function is to remove slag (miscellaneous) in the aluminum melt， and reduce the hydrogen content and aluminum loss. Different from the traditional powdery flux, the granular […]