Tag Archives: Ceramic Foam Filter Manufacturer

The final molten aluminum filtration step is usually a ceramic foam filter (CFF). This is a single-use disposable filter made of hard porous ceramic foam with strictly controlled pore size. Due to their simple operation and short-term good results, these are usually the only filtration equipment in many foundries. The three key parameters of CFF […]

Asian foundry filter agent has been authorized by China’s manufacturers to sell foam ceramic filters to local aluminum plants. The purification purpose of ceramic foam filter in aluminum foundry is to remove alumina slag and hydrogen from aluminum melt to improve the process and mechanical properties of aluminum materials or products. In the process of […]

The molten Al ceramic foam filter plate supplied by our company can effectively remove various inclusions in the molten aluminum with a fineness of micrometers, so that the aluminum water becomes a smooth laminar flow, which is conducive to filling; it has good mechanical strength and chemistry Stability, excellent aluminum water scouring resistance; strictly controlled […]

The quality of aluminum melt is very important, and it greatly affects the subsequent processing performance and the quality of the final product. Therefore, all countries in the world wish the purification of aluminum melt very seriously. Ceramic foam filtering technology has been used to remove inclusions in molten aluminum for more than 30 years. […]

The liquid metal filter was developed in the 1970s. The liquid metal purification technology was first applied to aluminum alloys. Because the melting point of aluminum alloys is low, the density of alloys and oxides are close, and inclusions are difficult to float. Inclusions are the most common casting defect. In casting production, many process […]

Aluminum liquid filtration generally uses foam ceramic filter filtration. When the aluminum liquid passes through the tortuous and interconnected pores in the foam ceramic, the internal debris is deposited on the wall of the pore under the action of fluid power, inertia, interception, collision, and adsorption. So that the clean aluminum liquid enters the casting […]

Aluminium is melted in a melting furnace before further processing and almost always filtration is required. The ceramic foam filter filtration method depends on the casting technique used or the treatment of the molten aluminum. It is generally believed that it is possible and beneficial only when sufficient amounts of metal are used. However, filters […]

Ceramic Filter for Molten Metal is widely used in metallurgy and casting industries. It adopts mullite (cordierite) ceramic material and high quality and high-density straight hole mesh, which makes the product have high heat shock resistance and high sintering temperature resistance. The straight hole design ensures the balance between flow rate and strength, effectively removes […]

Ceramic Foam Filter Rusal uses the formulas and processes of many well-known foreign companies. It has been carefully developed by introducing foreign production equipment and some raw materials. Its performance fully meets or exceeds the level of similar foreign products. Ceramic Foam Filter Rusal Product Function It can effectively eliminate large inclusions in the aluminum […]

Ceramic foam filter production process includes the selection of raw materials, produce, drying, and packing. Selection of Raw Materials (1) Foam plastic is the most critical material in the raw material of ceramic foam filters. It should have sufficient elasticity, the holes should be uniform, and it should have the ability to completely restore the […]