Blog

Alu Refiner is made of a variety of salt compounds by special process, using a refining powder sprayer with nitrogen as a carrier, and evenly spraying it into the aluminum liquid, thereby achieving double purification of the melt by gas and flux. This product is in aluminum It is widely used in the processing industry. […]

Aluminum alloy application is widely used in the world, includes aluminum can, aluminum foil, etc. Aluminum can absorb twice the crash energy of steel. Pound for pound, aluminum absorbs twice the crash energy of steel and performs as well in an accident. Aluminum crash rails fold up like an accordion, which dissipates and directs energy […]

The function of the aluminum liquid control system is to stabilize the liquid level of the front tank, keep the supply of liquid metal sufficient and stable, and ensure the continuity of casting and rolling. Aluminum Liquid Control System The lever flow controller uses the working principle of the lever to realize the smooth control […]

The gas hydrogen content and solid inclusions in the aluminum alloy melt are the main factors affecting the quality of aluminum alloy products. The presence of inclusions and gaseous hydrogen destroys the continuity of the metal. Due to the different elastic modulus and expansion coefficient between the inclusion and the metal matrix, the sharp corners […]

On June 11, the “15th China International Aluminum Processing Summit” hosted by SMM was also officially held in Yantai, Shandong. More than 500 representatives from leading aluminum companies, industry experts, and industrial customers gathered together to discuss “New problems and new outlets facing China’s aluminum processing industry in 2020”! AdTech Metallurgical Materials Co., Ltd. was […]

Aluminum Liquid Filtration Using mechanical filtration, when the metal melt passes through the filter media, it creates a mechanical barrier to non-metallic inclusions. The filter media also has an adsorption effect on the inclusions. Generally, the smaller the gap and the greater the thickness of the filter media, the lower the flow rate of the […]

The ceramic filter plate separates the inclusions through the three mechanisms of sieving, cake, and deep bed filtration. Three Filtration Mechanisms for Molten Aluminum Screening Filtration Mechanical filtration (screening): when the size of the inclusions is larger than the pore size of the filter plate, the filter plate acts like a sieve to block the […]

There are five aluminium slag removal methods, the main principle of five methods includes chemical slagging, density difference, flotation slagging, flux dissolution, mechanical filtration. AdTech degassing unit and filtering units mainly adopt flotation slagging and mechanical filtration principles. Aluminium Slag Removal Methods Chemical Slagging Compound slagging is based on the use of alkaline oxides and […]

During aluminum smelting, the oxide film is immersed in the melt. Some floats on the surface of the aluminum melt or stick to the furnace wall, and those aluminum droplets and the surface of the melt are oxidized again, which also forms the inclusions. Once the inclusions mixed into the cast-rolled strip, it will cause […]

The degassing aluminium method commonly used in the smelting process of aluminum and aluminum alloys is the partial pressure degassing method. In order to obtain the aluminum melt with low gas content, on the one hand, it is necessary to prepare materials carefully, strictly control the temperature, melt quickly, and adopt measures to reduce the […]